Fitting Brass, 16003
Pipe reducer with male and female thread 16003
REDR-PCE-ET-IT-BRS-G1 1/2XG1 3/4
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1-1/2 |
Thread type 2 x nominal diameter 2 (G2) | G1-3/4 |
Length (a) | 50 mm |
Length 2 (b) | 17 mm |
Length 3 (c) | 22 mm |
Internal diameter (d) | 35 mm |
Width across flats (S/S1) | 60 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Hanging basket 90° For floor unit full-extension slide VS SUB Side, body width 150 mm
Quick hardening glue
Truss-head rivets
Separating rail for centre separation
Gearbox oil TRIATHLON® Gear 80W
Drift punch According to DIN 6458
Disc spring for ball bearing
Hexagon nut with clamping piece (non-metal insert)
T-piece, reduced with solder connection EN1254, copper, 5130R
Threaded fitting