Fitting Brass, 16003
Pipe reducer with male and female thread 16003
REDR-PCE-ET-IT-BRS-G1/2XG3/4
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1/2 |
Thread type 2 x nominal diameter 2 (G2) | G3/4 |
Length (a) | 25.5 mm |
Length 2 (b) | 10 mm |
Length 3 (c) | 12.5 mm |
Internal diameter (d) | 15 mm |
Width across flats (S/S1) | 32 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Disposable protective glove Ejendals TEGERA® 842
Bucket
Adapter
Slotted raised countersunk head screw DIN 964, steel 4.8, plain
Hexagon Socket Head Cap Screw
Full face mask accessories
Work jacket
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Short sanding belt Klingspor LS 309 XH