Fitting Brass, 16003
Pipe reducer with male and female thread 16003
REDR-PCE-ET-IT-BRS-G1XG3/4
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1 |
Thread type 2 x nominal diameter 2 (G2) | G3/4 |
Length (a) | 30 mm |
Length 2 (b) | 13 mm |
Length 3 (c) | 12 mm |
Internal diameter (d) | 22.5 mm |
Width across flats (S/S1) | 34 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Crepe masking tape
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Work polo shirt Daiber 8010 Basic Polo
Concealed slide full-extension slide Dynapro With integrated soft-close system
Tapping screw, raised countersunk head
Ear plugs uvex hi-com Detec
Threaded fitting
Hand tap, taper tap HSS DIN 352
Nero vehicle document holder, unprinted Made of black nylon and synthetic leather
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive