Fitting Brass, 20041
Sealing cap hexagon 20041
BLKCAP-HEX-IT-BRS-G1 1/4
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1-1/4 |
Length (a) | 15 mm |
Width across flats (S/S1) | 47 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
T-piece, with solder connection on all sides EN1254, copper, 5130
Hexagonal bolt with flange in accordance with MBN standard
EPS profile thumbturn cylinder
Hexagon shoulder screw with long threaded pin DIN 609, steel 8.8, zinc-plated, blue passivated (A2K)
Compression cable lug DIN 46235
EPS profile double cylinder
TIPP® Express pipe clamp with hinge
Canister coating ORSY®protec
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Lanyard WAPS
