Fitting Brass, 20041
Sealing cap hexagon 20041
BLKCAP-HEX-IT-BRS-G1/8
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1/8 |
Length (a) | 8 mm |
Width across flats (S/S1) | 14 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hammer drill bit Plus Duo-S Vario
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Drilling and cutting foam CUT+COOL
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, zinc-plated, blue passivated (A2K)
Painters' spatula Made of flexible, high-quality steel (taper ground)
Vehicle dry abrasive paper disc RED PERFECT®
Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc-plated, blue passivated (A2K)
Hammer drill bit Plus Quadro-S
Identification rings, PVC
Adhesive backing pad, hook-and-loop disc Mirka medium sanding disc, without holes
