Fitting Brass, 26080
T-piece with female thread 26080
PCE-T-IT-BRS-G1/8
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1/8 |
Thread type 2 x nominal diameter 2 (G2) | G1/8 |
Nominal diameter 3 | 1/8 in |
Length (a) | 28 mm |
Length 2 (b) | 14 mm |
Length 3 (c) | 8 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Twist drill bit HSS DIN 338 type RN 118°
Cable and pipe spacer clip with longitudinal hole
EPS profile thumbturn cylinder
Sandpaper roll Useit® Superpad wood
Job+ T-shirt
Hexagonal bolt with shank
Welding goggles uvex 9116
ASSY® 4 A2 WH washer head screw A2 stainless steel plain partial thread washer head
4KS profile thumbturn cylinder
Flat-head screw with H cross recess ISO 7045, A4-70 stainless steel, plain