Fitting Brass, 55007
Flat-sealing standpipe fitting with wing nut 55007
ST-PIP-CON-WNGNUT-BRS-G1/2X13MM
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1/2 |
Thread type 2 x nominal diameter 2 (G2) | G3/4 |
Nominal diameter 3 | 13 mm |
Length (a) | 10 mm |
Length 2 (b) | 23 mm |
Internal diameter (d) | 11 mm |
Connection-piece diameter (D) | 14.5 mm |
Width across flats (S/S1) | 27 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Hexagon nut, inch
Hexagon head bolt, with thread to head and fine thread
Starlock tungsten carbide rasp, triangle shape
Spring for DC aluminium wheel For safety spoke weights made from zinc
Slotted raised countersunk head screw DIN 964, brass, plain
Threaded fitting
Knob cylinder 3KS
Crimp cable lug, ring shape Polyamide insulated
Compartment separator For drawer cabinets
Grooved nut with fine thread DIN 1804, steel, plain