Fitting Brass, 55007
Flat-sealing standpipe fitting with wing nut 55007
ST-PIP-CON-WNGNUT-BRS-G3/4X19MM
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G3/4 |
Thread type 2 x nominal diameter 2 (G2) | G1 |
Nominal diameter 3 | 19 mm |
Length (a) | 10 mm |
Length 2 (b) | 25 mm |
Internal diameter (d) | 17 mm |
Connection-piece diameter (D) | 21 mm |
Width across flats (S/S1) | 34 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Pine tree clip, type 5 Narrow pine tree shape
Cutting disc Speed Plus set stainless steel 125 pieces
Work jacket
Safety padlock, type 1
Cable tie clip AeroMount
Hexagon head bolt With thin shaft in hygienic design
Classic warm jacket
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Stud with threaded end ≈ 2d
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)