Fitting Brass, 56020
Standpipe fitt. conic. sealing with hex. nut 56020
ST-PIP-CON-NU-BRS-WS30-G1/2X13MM
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1/2 |
Thread type 2 x nominal diameter 2 (G2) | G3/4 |
Nominal diameter 3 | 13 mm |
Length (a) | 22 mm |
Length 2 (b) | 10 mm |
Internal diameter (d) | 11 mm |
Connection-piece diameter (D) | 14.2 mm |
Width across flats (S/S1) | 30 mm |
Width across flats 2 (S2) | 27 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Hexagon shoulder screw with short threaded pin DIN 610, steel 8.8, plain
First-aid case DIN 13169
HSCo Multi Performance combination tap
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
Low-cut safety shoes, S3
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
W-TEC® INSERT COIL — tang break-off tool
Hexagonal bolt with thread up to the head