Fitting Brass, 56020
Standpipe fitt. conic. sealing with hex. nut 56020
ST-PIP-CON-NU-BRS-WS46-G1X25MM
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1 |
Thread type 2 x nominal diameter 2 (G2) | G1-1/4 |
Nominal diameter 3 | 25 mm |
Length (a) | 32 mm |
Length 2 (b) | 15 mm |
Internal diameter (d) | 23 mm |
Connection-piece diameter (D) | 27.5 mm |
Width across flats (S/S1) | 46 mm |
Width across flats 2 (S2) | 42 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 12.9, plain
Fork head without split pin
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
O-ring, metric
W-VI-A anchor rod zinc-plated steel
Slotted flat-head screws with shoulder DIN 923, A1 stainless steel, plain
Eye bolt
Countersunk screw with hexalobular head
Plastic barrier post with base for barrier chains
Work trousers