Fitting solder no. 3

Name: Fitting solder no. 3
Brand: Würth
SKU: 0987132

Fitting solder no. 3
SLDR-NO3-SN97/CU3-250G-D2

Art.-no. 0987132

EAN 4011231918701

All versions

Prices for customers after login

Fitting solder no. 3

Art.-no. 0987132

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

S-Sn97Cu3 in accordance with DIN EN ISO 9453

Processing temperature: 270-300°C

Melting range: 230–250°C

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Suitable for soft soldering of copper pipes in cold and hot-water installation (heat-resistant up to 110°C), refrigeration and air-conditioning technology, heating technology, for radiator work

Wire diameter	2 mm
Spool diameter	44 mm
Weight of content	250 g
Min./max. melting temperature	230 to 250 °C
Max. processing temperature	300 °C
Min. melting temperature	230 °C
Max. melting temperature	250 °C
Min. processing temperature	270 °C
Material designation	S-Sn97Cu3

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.