Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200

Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200 - 1

Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200 - 2

Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200 - 3

Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200 - 4

Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200 - 5

Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200 - 6

Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200 - 7

Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200 - 8

Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200 - 9

Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200 - 10

Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200 - 11

Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200 - 12

Fixanchor W-FAZ PRO/A4 - ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200 - 13

Fixanchor W-FAZ PRO/A4

Name: Fixanchor W-FAZ PRO/A4
Brand: Würth
SKU: 5930412105

Fixanchor W-FAZ PRO stainless steel A4
ANC-(W-FAZ PRO/A4)-A4-50-125-M12X200

Art.-no. 5930412105

EAN 4062856404131

All versions

Similar products

Prices for customers after login

Fixanchor W-FAZ PRO/A4

Art.-no. 5930412105

Prices for customers after login

Quantity

x 25 pcs

Exclusively for trade customers

Login/Register
Call customer service:

High-performance stud anchors for highest loads in cracked and non-cracked concrete, stainless steel, A4

Highest load values at low spacing and edge clearances

Extra-large effective anchorage depths maximise the already high load values per anchor

Quick installation with fewer reinforcement hits

Extra-small effective anchorage depths minimise the drilling and setting time

Economical and flexible application

Freely selectable embedment depth allows optimum utilisation of the anchors depending on the embedment depth and application

Minimum edge distance and spacing

Allows for near-edge fixings, small anchor plates and installation in thin concrete parts

For earthquake-proof construction

High performance under seismic action, earthquake performance categories C1 and C2

Proof of Performance

European Technical Approval ETA-20/0229 for individual attachment, option 1, cracked and non-cracked concrete:

Static or quasi-static exposure (M8 - M16)

Seismic exposure, performance category C1 and C2 (M8–M16)

Fire load R30, R60, R90, R120

Load-bearing behaviour and fire load (uniform temperature curve) - expert opinion no. GS 6.1/20-018-1:

Fire duration 180 minutes (M8–M16)

Application area

Heavy steel structures

Post support bracket

Fastening of railings

Metal substructures

Create the drill hole

European Technical Approval ETA-20/0229 for individual attachment, option 1, cracked and non-cracked concrete:

Static or quasi-static exposure (M8 - M16)

Seismic exposure, performance category C1 and C2 (M8–M16)

Fire load R30, R60, R90, R120

Load-bearing behaviour and fire load (uniform temperature curve) - expert opinion no. GS 6.1/20-018-1:

Fire duration 180 minutes (M8–M16)

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Single or multiple mounting with approval

In standard concrete C20/25 to C50/60 (cracked and non-cracked concrete)

Suitable for cotter-pin installation, push-through installation and distance mounting

Suitable for anchoring medium to heavy loads in concrete:

Mounting of e.g. metal constructions, supports, steel supports, consoles, railings, cable conduits, pipe sections, wooden constructions, beams, joist brackets, etc.

Fastenings under seismic conditions in earthquake areas

Fastenings under exposure to fire

W-FAZ PRO/A4, stainless steel A4, may be used in dry indoor areas and for all other conditions in accordance with EN 1993-1-4:2015-10 appendix A, table A.3: CRC I-III


Metric anchor diameter	M12
Anchor length (l)	200 mm
Min./max. height of the fixture (t fix)	50-125 mm
Attachment height standard (t fix,std)	105 mm
Min. effective anchoring depth (h ef, min)	50
Max. effective anchoring depth (h ef, max)	125 mm
Effective anchoring depth Standard (h ef, std)	70 mm
Usable length (B)	175 mm
Attachment height variable (t fix ,var)	B - hef
Disc diameter x disc thickness	24 x 2.5 mm
Width across flats	19 mm
Nominal drill-bit diameter (d 0)	12 mm
Drill hole depth variable (h 0, var)	hef + 10
Min. drill hole depth (h 0, min)	60 mm
Max. drill hole depth (h 0, max)	135 mm
Drill hole depth Standard (h 0, std)	80 mm
Material	Stainless steel A4
Surface	Coated
Torque during anchoring (T inst)	60 Nm
Through-hole in the component to be connected (d f)	14 mm
Thread type x anchor diameter x thread length (L th)	M12 x 135
Approval	ETA-20/0229
Seismology C1	Yes
Seismology C2	Yes

Performance data¹⁾of an individual anchor without influence of the edge distance in accordance with ETA-20/0229
			In non-cracked concrete
Anchor diameter		[mm]	M8			M10			M12			M16
			In cracked concrete
Admissible centric tension load in concrete C 20/25³⁾	N_perm	[kN]	4,9	9,4	7,1	5,9	11,9	10,9	8,3	20,0	13,7	12,3	23,8	18,4
Admissible shear load in concrete C 20/25³⁾	V_perm	[kN]	9,6			15,9			22,7			39,7
Admissible bending moment	M_perm	[Nm]	15,4			31,4			56,6			127,4
Permissible load when exposed to fire (R30, R60, R90, R120), see European Technical Assessment ETA-20/0229
Permissible load when exposed to fire (F180) according to the uniform temperature curve based on TR20 see expert opinion no. GS 6.1/20-018-1
Variable effective anchorage depth	h_ef,var	[mm]	The anchoring depth can be selected variably between h_ef,min and h_ef,max. The Würth Technical Software helps you with the calculation.
			h_ef,min	h_ef,max	h_ef,std	h_ef,min	h_ef,max	h_ef,std	h_ef,min	h_ef,max	h_ef,std	h_ef,min	h_ef,max	h_ef,std
			35^₂₎	90	45	40	100	60	50	125	70	65	160	85
Admissible centric tension load in concrete C 20/25³⁾	N_perm	[kN]	3,4	4,5	4,5	4,1	8,1	7,6	5,8	10,5	9,6	8,6	16,7	12,9
Admissible shear load in concrete C 20/25³⁾	V_perm	[kN]	9,2	9,6	9,6	11,6	15,9	15,9	19,1	22,7	22,7	29,2	39,7	39,7
Admissible bending moment	M_perm	[Nm]	15,4			31,4			56,6			127,4
¹⁾ The partial safety factors of the resistances regulated in the ETA and a partial safety factor of the effect of γF = 1.4 have been taken into account. Please refer to the European Technical Assessment ETA-20/0229 ²⁾ for information on combining tensile and transverse loads, edge influence and groups of anchors ²⁾ Use with anchoring depths h_ef< 40 mm is limited to the anchoring of statically indeterminate systems under the condition of dry interiors ³⁾ The concrete has normal reinforcement. Higher values are possible for higher concrete compression strengths

Installation parameters^¹)
Anchor diameter		[mm]	M8				M10
Diameter of cutting edges	d_cut ≤	[mm]	8,45				10,45
Drill hole depth	h₀	[mm]	h_ef+8	43	98	53	h_ef+9	49	109	69
Through hole in attachment part	d_f ≤	[mm]	9				12
Width across flats	AF	[mm]	13				17
Torque while installing anchor	T_inst =	[Nm]	15				40
Height of the hexagon nut	t_nut	[mm]	6,5				8
Height x ∅ washer	t_w x d_w	[mm]	1.5 x 16				2 x 20
Variable effective anchorage depths		h_ef	h_ef,var	h_ef,min	h_ef,max	h_ef,std	h_ef,var	h_ef,min	h_ef,max	h_ef,std
Variable effective anchorage depths		[mm]	h_ef	35	90	45	h_ef	40	100	60
Setting depth	h_nom	[mm]	h_ef+8	43	98	53	h_ef+9	49	109	69
Minimum component thicknesses	h_min	[mm]	max (1.5·h_ef ; 80)	80	135	80	max (1.5·h_ef ; 80)	80	150	90
Minimum spacing	s_min	[mm]	35				40
Minimum edge distance	c_min	[mm]	40				45
Nominal drill diameter	d₀	[mm]	8				10
¹⁾ For anchor groups and anchorage close to the edge, the combinations of the minimum values (component thickness, spacing and edge distances) and the associated loads must be determined in accordance with the calculation methods of European Technical Assessment (ETA-20/00229), depending on the effective anchorage depth.

Installation parameters¹⁾
Drill hole depth	h₀	[mm]	h_ef+10	60	135	80	h_ef+14	79	174	99
Through hole in attachment part	d_f ≤	[mm]	14				18
Width across flats	AF	[mm]	19				24
Torque while installing anchor	T_inst =	[Nm]	60				110
Height of the hexagon nut	t_nut	[mm]	10				13
Height x ∅ washer	t_w x d_w	[mm]	2.5 x 24				3 x 30
Anchor diameter		[mm]	M12				M16
Variable effective anchorage depths		h_ef	h_ef,var	h_ef,min	h_ef,max	h_ef,std	h_ef,var	h_ef,min	h_ef,max	h_ef,std
Variable effective anchorage depths		[mm]	h_ef	50	125	70	h_ef	65	160	85
Setting depth	h_nom	[mm]	h_ef+10	60	135	80	h_ef+14	79	174	99
Minimum component thicknesses	h_min	[mm]	max (1.5·h_ef ; 100)	100	187,5	105	max (1.5·h_ef ; 120)	120	240	127,5
Minimum spacing	s_min	[mm]	50				65
Minimum edge distance	c_min	[mm]	55				65
Nominal drill diameter	d₀	[mm]	12				16
Diameter of cutting edges	d_cut ≤	[mm]	12,5				16,5
¹⁾ For anchor groups and anchorage close to the edge, the combinations of the minimum values (component thickness, spacing and edge distances) and the associated loads must be determined in accordance with the calculation methods of European Technical Assessment (ETA-20/00229), depending on the effective anchorage depth.

Additional accessory:

Product

Description

Quantity

Price
/PU

Plus Quadro-L Vario hammer drill bit

DRL-HAM-PLUS-Q-LV-D12,0-L210-WL160MM

ZEBRA

Art.-no. 0648051221

The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement

Dust extraction drill bit Plus D

EXTRDRL-PLUS-D-D12-L320-WL200MM

Art.-no. 0648451232

Extremely fast hammer drill bit with aggressive two-cutter head for drilling and suction in one work step

x 1 pcs

1/2 inch torque wrench With push-through square drive and fine-toothed ratchet head

TRQWRNCH-PSHTHRG-1/2IN-(20-100NM)

Art.-no. 071471 22

x 1 pcs

Machine setting tool

MECH-STGTL-(FIXANC-W-FAZ/W-FA)-(M8-M16)

Art.-no. 0904908016

For quick and convenient hammering in of Würth fixanchors W-FAZ PRO, W-FAZ (M8-M16) and W-FAZ using a hammer drill

x 1 pcs

Cordless hammer drill ABH 18 COMPACT M-CUBE

HAMDRL-CORDL-(ABH 18 COMPACT)-2X5AH

MASTER M-CUBE

Art.-no. 5701403004

Compact, powerful, brushless cordless hammer drill for medium-heavy drilling and light chiselling work

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).