Welcome to Würth Aerospace Solutions For trade customers only
Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115
Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 - 1
Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 - 2
Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 - 3
Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 - 4
Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 - 5
Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 - 6
Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 - 7
Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 - 8
Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 - 9
Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 - 10
Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115 - 11

Fixanchor W-FAZ PRO/S

Fixanchor W-FAZ PRO steel zinc plated
ANC-(W-FAZ PRO/S)-(A2K)-5-60-M8X115

Art.-no. 5930208050
EAN 4062856404438
All versions

Prices for customers after login
Fixanchor W-FAZ PRO/S

Art.-no. 5930208050

Prices for customers after login
Quantity
PU
x 100 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

High-performance wedge anchor for high loads in cracked and uncracked concrete, zinc-plated steel

Highest load values at low spacing and edge distances


Extra-large effective anchorage depths maximise the already high load values per anchor



Quick installation with fewer reinforcement hits


Extra-small effective anchorage depths minimise the drilling and embedment time



Economical and flexible application


Freely selectable embedment depth allows optimum utilisation of the anchors depending on the embedment depth and application



Minimal edge distances and spacing


Allows for fixings close to edges, small anchor plates and installation in thin concrete parts



For earthquake-proof construction


High performance under seismic action, seismic performance categories C1 and C2

Proof of Performance

European Technical Assessment ETA-20/0229 for individual fixing point, option 1, cracked and uncracked concrete:


  • Static or quasi-static action (M8-M16)

  • Seismic action, performance category C1 and C2 (M8-M16)

  • Fire resistance R30, R60, R90, R120


Load-bearing behaviour and fire resistance (uniform temperature curve) - expert report no. GS 6.1/20-018-1:


  • Fire duration 180 minutes (M8-M16)


Swiss Federal Office for Civil Protection (Bundesamt für Bevölkerungsschutz, BABS) - Approval for shock testing BZS D 20-602


  • Use in Swiss civil protection buildings (M8-M16, from standard anchorage depth hef,std)
Application area
Fastening of railings

Cable trays
Metal substructures
Heavy steel structures
Post support bracket

Create the drill hole

European Technical Assessment ETA-20/0229 for individual fixing point, option 1, cracked and uncracked concrete:


  • Static or quasi-static action (M8-M16)

  • Seismic action, performance category C1 and C2 (M8-M16)

  • Fire resistance R30, R60, R90, R120


Load-bearing behaviour and fire resistance (uniform temperature curve) - expert report no. GS 6.1/20-018-1:


  • Fire duration 180 minutes (M8-M16)


Swiss Federal Office for Civil Protection (Bundesamt für Bevölkerungsschutz, BABS) - Approval for shock testing BZS D 20-602


  • Use in Swiss civil protection buildings (M8-M16, from standard anchorage depth hef,std)
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Individual fixing point or anchors in a redundant non-structural system with approval


  • In normal weight concrete C20/25 to C50/60 (cracked and uncracked concrete)

  • Suitable for pre-positioned installation, in-place installation and stand-off installation


Suitable for anchoring medium to heavy loads in concrete:


Installation of e.g. metal constructions, supports, steel supports, brackets, railings, cable conduits, pipe sections, wooden constructions, beams, joist brackets etc.



Fastenings subject to seismic activity in earthquake-prone areas



Fastenings subject to exposure to fire



The W-FAZ PRO/S, galvanized steel, may only be used in dry indoor conditions

Metric anchor diameter

M8

Anchor length (l)

115 mm

Min./max. height of the fixture (t fix)

5-60 mm

Attachment height standard (t fix,std)

50 mm

Min. effective anchoring depth (h ef, min)

35 mm

Max. effective anchoring depth (h ef, max)

90 mm

Effective anchoring depth Standard (h ef, std)

45 mm

Usable length (B)

95 mm

Attachment height variable (t fix ,var)

B - hef

Disc diameter x disc thickness

16 x 1.5 mm

Width across flats

13 mm

Nominal drill-bit diameter (d 0)

8 mm

Drill hole depth variable (h 0, var)

hef + 8

Min. drill hole depth (h 0, min)

43 mm

Max. drill hole depth (h 0, max)

98 mm

Drill hole depth Standard (h 0, std)

53 mm

Material

Steel

Surface

Zinc plated

Torque during anchoring (T inst)

15 Nm

Through-hole in the component to be connected (d f)

9 mm

Thread type x anchor diameter x thread length (L th)

M8 x 73

Bolt protrusion (C)

10.5 mm

Approval

ETA-20/0229

Seismology C1

Yes

Seismology C2

Yes

Anchor diameter[mm]M8M10M12M16
Performance data1) on an individual anchor without the influence of the edge distance
in uncracked concrete
Admissible load when exposed to fire (R30, R60, R90, R120), see European Technical Assessment ETA-20/0229
Admissible load when exposed to fire (F180) according to the uniform temperature curve based on TR20, see expert report no. GS 6.1/20-018-1
in cracked concrete
Admissible centric tension load in concrete C 20/253)Nadm[kN]5,06,76,76,111,411,28,514,314,112,623,818,8
Admissible shear load in concrete C 20/253)Vadm[kN]9,015,321,934,3
Admissible bending momentMadm[Nm]17,134,360,0137,1
Variable effective anchorage depthhef,var[mm]The effective anchorage depth can be set to anywhere between hef,min and hef,max. The Würth Technical Software can help you with the calculation.
hef,minhef,maxhef,stdhef,minhef,maxhef,stdhef,minhef,maxhef,stdhef,minhef,maxhef,std
352)9045401006050125706516085
Admissible centric tension load in concrete C 20/253)Nadm[kN]3,54,54,54,37,17,16,110,510,09,014,313,4
Admissible shear load in concrete C 20/253)Vadm[kN]9,09,09,013,415,315,318,221,921,932,334,334,3
Admissible bending momentMadm[Nm]17,134,360,0137,1
1) The partial safety factors of the resistances stipulated in the ETA and a partial safety factor of the action of γF = 1.4 have been taken into account. Please refer to the European Technical Assessment ETA-20/0229 for information on combining tensile and shear loads, variable effective anchorage depths influenced by edge distances and groups of anchors 2)
2) Use is limited to the anchoring of statically indeterminate systems in dry indoor conditions
3) The concrete has normal reinforcement. Higher values are possible for higher concrete compressive strengths
Installation parameters1)
Anchor diameter[mm]M8M10
∅ of cutting edgesdcut ≤[mm]8,4510,45
Drill hole depthh0[mm]hef+8439853hef+94910969
Through hole in the fixturedf ≤[mm]912
Width across flatsAF[mm]1317
Torque while installing anchorTinst =[Nm]1540
Height of the hexagon nuttnut[mm]6,58
Height x ∅ of washertw x dw[mm]1.5 x 162 x 20
Variable effective anchorage depthshefhef,varhef,minhef,maxhef,stdhef,varhef,minhef,maxhef,std
[mm]hef359045hef4010060
Embedment depthhnom[mm]hef+8439853hef+94910969
Minimum member thicknesseshmin[mm]max
(1.5·hef; 80)		8013580max
(1.5·hef; 80)		8015090
Minimum spacingsmin[mm]3540
Minimum edge distancecmin[mm]4045
Nominal drill ∅d0[mm]810
1) For groups of anchors and anchorage close to the edge, the combinations of the minimum values (member thickness, spacing and edge distances) and the associated loads must be determined in accordance with the calculation methods of European Technical Assessment (ETA-20/00229), depending on the effective anchorage depth.
Installation parameters1)
Anchor diameter[mm]M12M16
Nominal drill ∅d0[mm]1216
∅ of cutting edgesdcut ≤[mm]12,516,5
Drill hole depthh0[mm]hef+106013580hef+147917499
Through hole in the fixturedf ≤[mm]1418
Width across flatsAF[mm]1924
Torque while installing anchorTinst =[mm]60110
Height of the hexagon nuttnut[mm]1013
Height x ∅ of washertw x dw[mm]2.5 x 243 x 30
Variable effective anchorage depthshefhef,varhef,minhef,maxhef,stdhef,varhef,minhef,maxhef,std
[mm]hef5012570hef6516085
Embedment depthhnom[mm]hef+106013580hef+147917499
Minimum member thicknesseshmin[mm]max
(1.5·hef; 100)		100187,5105max
(1.5·hef; 120)		120240127,5
Minimum spacingsmin[mm]5065
Minimum edge distancecmin[mm]5565
1) For groups of anchors and anchorage close to the edge, the combinations of the minimum values (member thickness, spacing and edge distances) and the associated loads must be determined in accordance with the calculation methods of European Technical Assessment (ETA-20/00229), depending on the effective anchorage depth.
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Plus Quadro-L Vario hammer drill bit
Plus Quadro-L Vario hammer drill bit

DRL-HAM-PLUS-Q-LV-D12,0-L210-WL160MM

ZEBRA
The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement
Dust extraction drill bit Plus D
Dust extraction drill bit Plus D

EXTRDRL-PLUS-D-D12-L320-WL200MM

Extremely fast hammer drill bit with aggressive two-cutter head for drilling and suction in one work step
x 1 pcs
1/2 inch torque wrench With push-through square drive and fine-toothed ratchet head
1/2 inch torque wrench With push-through square drive and fine-toothed ratchet head

TRQWRNCH-PSHTHRG-1/2IN-(20-100NM)

x 1 pcs
Machine setting tool
Machine setting tool

MECH-STGTL-(FIXANC-W-FAZ/W-FA)-(M8-M16)

For quick and convenient hammering in of Würth fixanchors W-FAZ PRO, W-FAZ (M8-M16) and W-FAZ using a hammer drill
x 1 pcs
Cordless hammer drill ABH 18 COMPACT M-CUBE
Cordless hammer drill ABH 18 COMPACT M-CUBE

HAMDRL-CORDL-(ABH 18 COMPACT)-2X5AH

MASTER M-CUBE
Compact, powerful, brushless cordless hammer drill for medium-heavy drilling and light chiselling work
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details