Fixanchor W-FAZ/S

Name: Fixanchor W-FAZ/S
Brand: Würth
SKU: 0904521218

Fixanchor W-FAZ steel zinc plated
ANC-(W-FAZ/S)-(A2K)-145-M12X240

Art.-no. 0904521218

EAN 4050642496583

All versions

Specification

Bolt anchor for high loads in cracked and non-cracked concrete. Steel, zinc-plated

High loads, small distance and edge distance

Immediate load-bearing capacity, no waiting times

Time-saving in-place installation

Reduced effective anchorage depth

Minimised drilling, time-saving

Versatile applications

Proof of Performance

ETA-99/0011 for individual fixing point, option 1, cracked and uncracked concrete, seismic performance category C1 and C2 (M8-M20)

Fire resistance (M8-M16): F30, F60, F90 and F120; exposure to fire according to DIN 4102-2:1977-09 (uniform temperature curve)

Fire resistance: R30, R60, R90 and R120; TR020 (included in ETA-99/0011)

Application area

Heavy steel structures

Fence systems

Post support bracket

Create the drill hole

Knock in anchor with mason's mallet or machine setting tool

Set anchor in place

Apply torque

ETA-99/0011 for individual fixing point, option 1, cracked and uncracked concrete, seismic performance category C1 and C2 (M8-M20)

Fire resistance (M8-M16): F30, F60, F90 and F120; exposure to fire according to DIN 4102-2:1977-09 (uniform temperature curve)

Fire resistance: R30, R60, R90 and R120; TR020 (included in ETA-99/0011)

Application

Application area

Individual fixing point with approval

Standard concrete C20/25 to C50/60 (cracked and uncracked concrete, seismic performance category C1 and C2)

For the attachment of e.g. metal structures, metal profiles, brackets, base plates, supports, cable conduits, pipes, railings, wooden structures, roof beams, etc.

Individual fixing point without approval

For use in concrete < C20/25 and pressure-resistant natural stone

W-FAZ/S may only be used in dry indoor room conditions

Technical information

Metric anchor diameter	M12
Anchor length (l)	240 mm
Attachment height (t fix)	145 mm
Effective anchoring depth (h ef)	70 mm
Width across flats	19 mm
Nominal drill-bit diameter (d 0)	12 mm
Drill hole depth (h 1)	90 mm
Material	Steel
Surface	Zinc plated
Torque during anchoring (T inst)	45 Nm
Through-hole in the component to be connected (d f)	14 mm
Approval	ETA-99/0011

Performance data
Anchor diameter [mm]			M8		M10		M12		M16		M20	M24	M27
Standard effective anchorage depth/ Reduced effective anchorage depth		h_ef/h_ef,red[mm]	46	35³⁾	60	40	70	50	85	65	100	115	125
Admissible centric tension load¹⁾ on an individual anchor without the influence of the edge distance	Tensile zone (cracked concrete C20/25^2₎, s ≥ 3 h_ef c ≥ 1.5 h_ef)	N_adm [kN] = C20/25²⁾	2,4	2,4	4,3	3,6	7,6	6,1	11,9	9,0	17,1	21,1	24,0
	Compressive zone (uncracked concrete C20/25²⁾, (s_cr,spandc_cr,sp see approval)	N_adm [kN] = C20/25²⁾	5,7	3,6	7,6	4,3	11,9	8,5	16,7	12,6	24,0	29,7	33,6
Permissible shear load¹⁾ on an individual anchor without the influence of the edge distance	Tensile zone (cracked concrete C20/25²⁾, c ≥ 10 h_ef)	V_adm [kN] = C20/25²⁾	7,0	7,0	11,5	10,4	17,1	14,5	31,4	21,6	37,1	59,2	67,1
	Compressive zone (uncracked concrete C20/25²⁾, c ≥ 10 h_ef)	V_adm [kN] = C20/25²⁾	7,0	7,0	11,5	11,5	17,1	17,1	31,4	30,2	37,1	65,1	94,1
Permissible bending moment		M_adm [Nm]	13,1	13,1	26,9	26,9	46,9	46,9	123,4	123,4	195,0	513,1	760,9
Admissible load when exposed to fire (R30, R60, R90, R120) see European Technical Assessment ETA-99/0011
Fire resistance rating		F30 [kN]	2,0	-	5,6	-	9,0	-	16,0	-	-	-	-
		F60 [kN]	1,0	-	2,2	-	3,5	-	7,0	-	-	-	-
		F90 [kN]	0,65	-	1,3	-	2,0	-	4,3	-	-	-	-
		F120 [kN]	0,5	-	0,8	-	1,3	-	3,0	-	-	-	-
¹⁾ The partial safety factors of the resistances regulated in the approval and a partial safety factor of the effects of γ_F = 1.4 have been taken into account. Please refer to the European Technical Approval Guidelines (ETAG), Appendix C, for information on combining tensile and shear loads, the influence of the edge distance and groups of anchors. ²⁾ The concrete has normal reinforcement. Higher values are possible for higher concrete compressive strengths. ³⁾ The use is limited to the anchorage of statically indeterminate systems.

Characteristic values
Anchor diameter [mm]		M8		M10		M12		M16		M20	M24	M27
Standard effective anchorage depth/ Reduced effective anchorage depth	h_ef/h_ef,red[mm]	46	35³⁾	60	40	70	50	85	65	100	115	125
Embedment depth	h_nom [mm]	52	41	68	48	80	60	97	77	114	133	146
Axis distance	S_cr,N [mm]	138	105	180	120	210	150	255	195	300	345	375
Edge distance	C_cr,N [mm]	69	52,5	90	60	105	75	127,5	97,5	150	172,5	187,5
Standard minimum member thickness	h_std ≥ [mm]	100	_	120	_	140	_	170	_	200	230	250
Minimum axis distance Cracked concrete	s_min ≥ [mm]	40	_	45	_	60	_	60	_	95	100	125
Minimum axis distance Uncracked concrete	s_min ≥ [mm]	40	_	45	_	60	_	65	_	90	100	125
Minimum axis distance Cracked concrete	for c ≥ [mm]	70	_	70	_	100	_	100	_	150	180	300
Minimum axis distance Uncracked concrete	for c ≥ [mm]	80	_	70	_	120	_	120	_	180	180	300
Minimum edge distance Cracked concrete	c_min ≥ [mm]	40	_	45	_	60	_	60	_	95	100	180
Minimum edge distance Uncracked concrete	c_min ≥ [mm]	50	_	50	_	75	_	80	_	130	100	180
Minimum edge distance Cracked concrete	for s ≥ [mm]	80	_	90	_	140	_	180	_	200	220	540
Minimum edge distance Uncracked concrete	for s ≥ [mm]	100	_	100	_	150	_	150	_	240	220	540
Reduced minimum member thickness	h_min [mm]	80	80	100	80	120	100	140	140	-	-	-
Minimum axis distance Cracked concrete	s_min ≥ [mm]	40	50	45	50	60	50	70	65	-	-	-
Minimum axis distance Uncracked concrete	s_min ≥ [mm]	40	50	60	50	60	50	80	65	-	-	-
Minimum axis distance Cracked concrete	for c ≥ [mm]	70	60	90	100	100	160	160	170	-	-	-
Minimum axis distance Uncracked concrete	for c ≥ [mm]	80	60	140	100	120	160	180	170	-	-	-
Minimum edge distance Cracked concrete	c_min ≥ [mm]	40	40	50	65	60	65	80	100	-	-	-
Minimum edge distance Uncracked concrete	c_min ≥ [mm]	50	40	90	65	75	100	90	170	-	-	-
Minimum edge distance Cracked concrete	for s ≥ [mm]	80	185	115	180	140	250	180	250	-	-	-
Minimum edge distance Uncracked concrete	for s ≥ [mm]	100	185	140	180	150	185	200	65	-	-	-
Nominal drill diameter	d₀ [mm]	8		10		12		16		20	24	28
Diameter of cutting edges	d_cut≤ [mm]	8,45		10,45		12,5		16,5		20,55	24,55	28,55
Drill hole depth	h₁≥ [mm]	60	49	75	55	90	70	110	90	125	145	160
Through hole in the component being connected	d_f≤ [mm]	9		12		14		18		22	26	30
Torque while installing anchor	T_inst = [Nm]	20		25		45		90		160	200	300

Documents/CAD data

Product information

Datasheets (1)

CAD data (available after login)

Certificates/ Documents (0)

Accessory

Additive article:

Product

Description

Quantity

Price
/PU

Machine setting tool

MECH-STGTL-(FIXANC-W-FAZ/W-FA)-(M8-M16)

Art.-no. 0904908016

For quick and convenient hammering in of Würth fixanchors W-FAZ PRO, W-FAZ (M8-M16) and W-FAZ using a hammer drill

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).