Flap hinge TIOMOS
Tiomos flap hinge
HNGE-TIOMOS-FLAP-90DGR-MAX21MM
GRASS
Register now and access more than 125,000 products
- Opening angle 90°
- For flaps up to 21 mm thick
- Narrow joint profile
- 3-dimensional adjustment
Flap and floor parts secured with chipboard screws, ∅ 3.5 x 15 mm.
Hinge dimensions and joint calculation according to factory setting.
Dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Door position | Overlay |
Damper | No |
Spring | No |
Type of assembly | Screw-on |
Hole drilling | 0 - not applicable |
Suitable for min./max. door thickness | 14-21 mm |
Surface | Nickel plated |
Material | Die-cast zinc |
Opening angle | 90 Degree |
| Minimum gap (F) | ||
| Folding strength (TS) | 14 | 1 |
| 15 | 1 | |
| 16 | 1 | |
| 17 | 1 | |
| 18 | 1 | |
| 19 | 1 | |
| 20 | 1.5 | |
| 21 | 2.5 | |
Last viewed
Thin-walled heat-shrink hose Without internal adhesive
Storage box
Solid carbide radius cutter, short, triple blade
Sport Crux S1P ESD safety sandals
Leather belt With metal double-pin buckle
Stripping knife AM 280
HSCo8 end mill, long DIN 844L
Hexagonal nut with collar, 1.5xd high DIN 6331, steel 10, plain
VARIFIX® c-assembly rail 41/41
Full-extension slide Nova Pro soft-close