Flat chisel Plus Longlife & Speed
Flat chisel plus LS
FLCHIS-PLUS-LS-L250-W20MM
ZEBRA
Register now and access more than 125,000 products
Optimised jam protection
The new chisel shape prevents jamming and reduces friction.
High removal rate
Self-sharpening design removes more material in less time and ensures a high removal rate across the tool's full service life.
Up to 200 % longer service life compared to standard versions
Extended work area
Convex pronounced area for penetration
- Central load transfer
- Better transfer of shock waves
- Higher penetration resistance
Datasheets(X)
For general breaking-up and breaking-through work (spiking, mortising, knocking out, pounding, breaking open, breaking out etc.). For softer materials. Can also be used for marking masonry to be knocked out.
Length | 250 mm |
Width | 20 mm |
Tool holding device | Suitable for SDS-plus |
Last viewed
1/4 inch socket wrench insert TX with hole
CLIP-O-FLEX® tool trolley
System assortment 6.4.1, bi-hex 1/2-inch socket wrench 20 pieces
Starline Plus work dungarees
Green Pin® SC shackle, curved
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Jacket Planam Highline
Countersunk head screw
Low-cut safety shoes, S3
Counterbore Ruko HSS with morse taper and fixed pilot, quality grade: fine for through holes