Flat gasket For flat-sealing screw joints of heating and drinking water pipes
Flat gasket
FLSEAL-DN25
Register now and access more than 125,000 products
DVGW-certified
Simultaneous straining of the gasket with the maximum values for temperature and operating pressure is not possible. The specifications also depend on the medium, so they are therefore only guidelines.
Datasheets(X)
 | |
Material | Aramid fibre |
Colour | Grey |
DN nominal width | DN 25 |
Internal diameter (d1) | 25 mm |
Outer diameter (d2) | 38.5 mm |
Thickness (h) | 2 mm |
Min. temperature resistance | -50 °C |
Max. temperature resistance | 200 °C |
Max. operating pressure | 40 bar |
Approval mark | DVGW |
Last viewed
Screwdriver PH striking cap with hexagon shank
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Hexagonal bolt with thread up to head for pressure container construction DIN 933, A4 stainless steel, plain
Welding glove
Bodywork lever set 32 pcs.
Automatic jump starter
Sealing cap For system transport trolleys
Torque tester Stahlwille TORSIOMETER 7750
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Drive-in nut