Flat gasket For flat-sealing screw joints of heating and drinking water pipes
Flat gasket
FLSEAL-DN8
Register now and access more than 125,000 products
DVGW-certified
Simultaneous straining of the gasket with the maximum values for temperature and operating pressure is not possible. The specifications also depend on the medium, so they are therefore only guidelines.
Datasheets(X)
 | |
Material | Aramid fibre |
Colour | Grey |
DN nominal width | DN 8 |
Internal diameter (d1) | 8.0 mm |
Outer diameter (d2) | 15.0 mm |
Thickness (h) | 2.0 mm |
Min. temperature resistance | -50 °C |
Max. temperature resistance | 200 °C |
Max. operating pressure | 40 bar |
Approval mark | DVGW |
Last viewed
Engine oil TRIATHLON® Formula DX2 5W-30
Guide head For CPS cable feed devices (apart from CPS 1)
Pan head tapping screw, shape F with recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), round head, PH drive
Cable tie KBL 2 black With plastic latch
PUR 250 type 175 insulation pipe clamp With screws, a permanent PUR hard foam coating and rubber shell on the inside
Half-zip work jumper JN831 workwear half-zip sweatshirt
Pipe pin for ISO M clamping system
SPE wide sanding belt, individual
Blanking plug for rubber module
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled