Flat head drilling screws with recessed head and self-tapping screw thread
ISO 15481 steel zinc plated pan head H
SCR-DBIT-PANHD-ISO15481-H3-(A2K)-5,5X16
Register now and access more than 125,000 products
- Drilling, threading and screwing in one step
- Considerably reduced time and effort
Drilling screw with pan head
Ideal for steel/steel connections (e.g. sheet metal profiles) up to 1.25 mm and steel/steel connections up to 2x1.25 mm
Datasheets(X)
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d1) | 5.5 mm |
Length (l1) | 16 mm |
Head diameter (dk) | 11 mm |
Head height (k1) | 4 mm |
Drill tip length (lp) | 11 mm |
Other standard | 0 - not applicable |
Internal drive | H3 |
Head type | Pan head |
Thread type | Self-tapping screw thread |
Max. material thickness to be drilled through (metal) | 5.25 mm |
Max. material thickness | 5.25 mm |
Min./max. recommended installation speed (idling) | 1000-1800 rpm |
RoHS-compliant | Yes |
Last viewed
Tetrahedral warning sign "Dangerous electrical voltage" With magnetic base
Slotted cheese head DIN 84, steel 4.8, plain
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Threaded pin ISO 4027, steel 45H, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw with centre, with low head
STAMISOL ADVANCED FA 2 TAPE façade membrane
Manual screw tap, assortment 3-piece Ruko hand tap cassette HSS DIN 352
Lashing plate, aluminium
HSS annular cutter
FLEXEN® adhesive For FLEXEN® S2 rubber foam heat insulation, rubber foam refrigeration insulation plus, rubber foam refrigeration insulation, PE, PE stable, compact eccentric block