Flat-sealing half screw connection EN1254, gunmetal, 3335
EN1254 gunmetal 3335
FITT-SCR-1254-IT/ET-GM-1 1/4X1 1/2-3335
Register now and access more than 125,000 products
- For universal use in various applications
- Conforms to many different international certification systems such as DVGW, KIWA and SVGW
The suitability for drinking water is confirmed by DVGW type examination certificate DV-7401AS2289 and by ÜA registration certificate no. R-15.2.3-20-17025.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations, technical rules for LPG (TRF)
- Heating oil supply systems DIN 4755 (TRÖ)
- Hot water heating DIN EN 12828
- Local and district heating lines DIN 4747
- Thermal solar systems
- Water-based room cooling systems
- Compressed air
- Equipment for the distribution of technical gases
- Rainwater harvesting systems DIN 1989
- Fire-extinguishing pipes DIN 14462
- Sprinkler systems VdS CEA 4001
- Industrial and process water
- Wastewater pumping stations
 | |
Nominal diameter | 1 1/4 in |
Nominal diameter 2 | 1 1/2 in |
Connection thread | R 1 1/4 x G 1 1/2 inch |
Connection type | 1. connection conical male thread (R) |
Width across flats (S/S1) | 1 1/2 inch |
Material | Red bronze - gunmetal |
Surface | Plain |
Standards | DIN 1254 |
Last viewed
Pan head screw, inch, aerospace MS 35206, cadmium-plated steel
TX insert bit
Plastic cover cap with sealing lip for pan head screw
K insulation pipe clamp With permanently integrated damping insert
Pan head tapping screw with flange
Cross handle with stud
ASSY®plus VG 4 CSMP construction screw Steel zinc plated full thread countersunk milling pocket head
Hexagonal bolt with shank DIN 931, steel 10.9, zinc-plated, blue passivated (A2K)
Stud with threaded end ≈ 1 d DIN 938, A2/70 stainless steel, plain
Cylindrical grooved pin with chamfer DIN 1473, A1 stainless steel, plain