Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
ISO 7089 steel 200 HV hot dip galvanized
WSH-ISO7089-200HV-(HDG)-10
Register now and access more than 125,000 products
- Replaces DIN 125
- Washers with hardness class 200 HV can be used in combination with bolts in strength class ≤ 8.8 and nuts in strength class ≤ 8
Specified dimensions not binding. Subject to technical changes!
 | |
Suitable for screw thread | M10 |
Internal diameter (d1) | 10.5 mm |
Outer diameter (d2) | 20 mm |
Thickness (h1) | 2.000 mm |
Standards | ISO 7089 |
Material | Steel |
Vickers hardness, HV | 200 HV |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Stop angle Accuracy 1
Clamping jaw set For mobile universal flaring tool
Grooved cylindrical pin with chamfer ISO 8740, A1 stainless steel
Work coat
Blancomida S tap With a gently curved spout on a slender, straight body
Hand-lever drum pump
Backing pad sanding disc Klingspor NDS 555 C
Wing repair washer In accordance with DIN 522, A2 stainless steel, plain
Flat washer with chamfer
Divider assortment Divider assortment with compartment rails and compartment dividers for system dimensions 8.8
