Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
ISO 7089 steel 200 HV hot dip galvanized
WSH-ISO7089-200HV-(HDG)-22
Register now and access more than 125,000 products
- Replaces DIN 125
- Washers with hardness class 200 HV can be used in combination with bolts in strength class ≤ 8.8 and nuts in strength class ≤ 8
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Suitable for screw thread | M22 |
Form | 0 - not applicable |
Internal diameter (d1) | 23 mm |
Outer diameter (d2) | 39 mm |
Thickness (h1) | 3.3 mm |
Standards | ISO 7089 |
Material | Steel |
Vickers hardness, HV | 200 HV |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Suitable for | 0 - not applicable |
Last viewed
Tension spring with double eyes DIN 2097, spring steel wire, zinc-plated steel
Knife blade Martor 360° swivel blade no. 798
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
GEFU® thread-rolling screw With Taptite 2000® thread, flat cylinder head and hexalobular drive
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Low-cut safety shoes, SB
Fabric mounting tape for interior use rust-proof, no sharp edges
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Clamping jaw, large, universal diameter 120 mm-205 mm