Fleece sanding sleeve for expansion and inflatable rollers
SANDDISC-FLC-SLEV-COARSE-100X100MM
Art.-no. 0585551100
EAN 4038898835431
Register now and access more than 125,000 products
- Reinforced nylon sanding fleece with needled-through fabric carrier
- High tear resistance, uniform sanding pattern, waterproof and stretch-resistant
Max. rotating speed: 2800 rpm
Datasheets(X)
Burnishing, matting, polishing, removing tempering colour, removing surface defects (light scratches) and smoothing surfaces.
Materials to be processed:
Stainless steel, steel, brass, copper and aluminium, wood and plastics
At high speeds a coarse grain acts like a finer grain and at low speeds a fine grain acts like a coarser one.
Use tools with a low contact pressure; high contact pressure leads to premature wearing.
With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain.
Width x length | 100 mm x 100 mm |
Design | Coarse |
Colour | Brown |
Grid size | P100 |
Last viewed
Low-cut safety shoes S3 Elten Senex ESD 728321
EPS profile double cylinder
Hexagon bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Cut-resistant glove Ejendals TEGERA® 8255T
Hexagonal bolt with shank and fine thread ISO 8765, zinc plated 10.9 steel with thick-layer passivation (VZD)
Hexagon bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
3/8" socket wrench insert for external TX screws, short
Plus Quadro-L Vario hammer drill bit
Pipe protective cap GPN 250
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)