Welcome to Würth Aerospace Solutions For trade customers only
Flex-Quick Adhesive CERAfix 410 - ADH-TLE-FLEX-CERAFIX410-C2-FTE-S1-25KG

Flex-Quick Adhesive CERAfix 410

Tile adhesive CERAfix 410 C2 FTE S1
ADH-TLE-FLEX-CERAFIX410-C2-FTE-S1-25KG

Art.-no. 5875100410
EAN 4099618249792
All versions

Prices for customers after login
Flex-Quick Adhesive CERAfix 410

Art.-no. 5875100410

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Fast laying of ceramic tiles
  • Mineral fast-acting adhesive with effective water bonding

  • C2 FTE S1 according to DIN EN 12004

  • Can be walked on and grouted after approx. three hours

  • Processing time of approx. 45-60 minutes

  • Adhesive bed thicknesses from 1 mm to 15 mm

  • Consumption with 6 mm bead is 2.3 kg/m² , with 8 mm bead 3.1 kg/m², with 10 mm bead 3.8 kg/m²
Notice

Plasticity class S2 is achieved by adding CERAfix 420:


Mixture ratio: 2.5 kg CERAfix 420 : 25 kg CERAfix 410

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as the storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

CERAfix 410 is applied as a quick-hardening, solid thin-bed mortar for working under time constraints. Suitable for laying ceramic tiles and slabs using the thin-bed or medium-bed processes. CERAfix 410 is suitable for indoor and outdoor use and heated and unheated surfaces.



  • Suitable for laying ceramic tiles and slabs using the thin-bed or medium-bed processes

  • For creating tiled surfaces that can be walked on and used quickly

  • For heated and unheated surfaces

  • For walls and floors

  • For indoor and outdoor applications


The requirements of the DIN 18157-1 and the recognised technical regulations apply for preparing the laying surfaces. Check the laying surface and determine residual moisture using the CM method.



Test certificates


  • Test report acc. to DIN EN 12004

  • EMICODE licence
Instructions

Surface


The surface must be dry, load-bearing, sufficiently flat, free of continuous cracks and free of separating substances and loose parts. Prime absorbent surfaces with CERAfix 101.



Suitable surfaces:


  • Securely adhered tile coverings, concrete, cement screed (CT), floor levelling compounds, calcium sulphate screeds (CA, CAF), poured tarmac screeds (AS), magnesia screeds (MA)

  • Cement-based plasters, gypsum plaster, lime cement plaster, lightweight plaster tile bearing elements, fibreboard panels, plasterboards, cavity floor, cement and fibre cement panels, decoupling mats and panels, dry screeds

Sealing in a compound structure; the suitability of the surface must be checked and observed taking into account the planned DIN 18534 and DIN 18531 water impact classes.



  • In a clean bucket, mix CERAfix 410 with clean water into a homogeneous mixture

  • Mixture ratio: 7.75-8.25 l water

  • Mix through again after the corresponding maturing time


Do not mix with other mortars containing cement!



Apply a contact layer on the surface with CERAfix 410 and comb through with a suitable cut. Lay covering materials within the bonding time.

Weight of content

25 kg

Chemical basis

Cement and additives

Colour

Cement grey

Min./max. processing temperature

5 to 25 °C

Processing time

45 min

Application quantity in weight/area/conditions

2.3 kg/m² / for 6-mm toothing

May be walked on after max.

3 h

May be walked on in following conditions

at 20°C and 65% relative humidity

Groutable after

3 h

Grouting condition

at 20°C and 65% relative humidity

Full load capacity/conditions

7 d / at 20°C and 65% relative humidity

Shelf life from production/conditions

12 Month / cool and dry storage area

Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Agitator RW 1010
Agitator RW 1010

AGITR-EL-RW1010

MASTER
The compact 1010 W agitator with matching mixing tool is ideally suited for a wide range of mixing jobs up to a maximum volume of 40 litres.
x 1 pcs
2-component toothed trowel
2-component toothed trowel

TOTRWL-SST-(2C-HNDL)-SERW6

Rust-proof stainless steel trowel with 2-C handle
2-component toothed trowel
2-component toothed trowel

TOTRWL-SST-(2C-HNDL)-SERW8

Rust-proof stainless steel trowel with 2-C handle
2-component toothed trowel
2-component toothed trowel

TOTRWL-SST-(2C-HNDL)-SERW10

Rust-proof stainless steel trowel with 2-C handle
2-component toothed trowel
2-component toothed trowel

TOTRWL-SST-(2C-HNDL)-SERW12

Rust-proof stainless steel trowel with 2-C handle
x 1 pcs
2-component toothed trowel
2-component toothed trowel

TOTRWL-SST-(2C-HNDL)-SERW15

Rust-proof stainless steel trowel with 2-C handle
x 1 pcs
2-component toothed trowel
2-component toothed trowel

TOTRWL-SST-(2C-HNDL)-SERW4

Rust-proof stainless steel trowel with 2-C handle
x 1 pcs
Toothed trowel 2C, with trapezoidal toothing
Toothed trowel 2C, with trapezoidal toothing

TOTRWL-SST-(2C-HNDL)-HOLWFRE

Rust-proof trowel with 2C handle for laying tiles and slabs without hollow spaces
Toothed trowel 2C, with semicircular toothing
Toothed trowel 2C, with semicircular toothing

TOTRWL-SST-(2C-HNDL)-HRD-SERW20/10

Rust-proof trowel with 2-C handle
x 1 pcs
Toothed trowel 2C, with double toothing
Toothed trowel 2C, with double toothing

DBTOTRWL-SST-(2C-HNDL)-(12X12/4X4TO)

Double serration enables both the buttering (applying adhesive to the reverse of the tiles) and floating (applying adhesive to the surface) procedures to be carried out with one trowel.
x 1 pcs
Toothed trowel 2C, with double toothing
Toothed trowel 2C, with double toothing

DBTOTRWL-SST-(2C-HNDL)-(12X12/4X4TO)-FLT

Double serration enables both the buttering (applying adhesive to the reverse of the tiles) and floating (applying adhesive to the surface) procedures to be carried out with one trowel.
x 1 pcs
Smoothing trowel, 2-component, Venetian shape
Smoothing trowel, 2-component, Venetian shape

SMOTHTRWL-SST-(2C-HNDL)-L200-W80-TH0,7

Rust-proof trowel with 2-C handle
x 1 pcs
Dual component notched trowel, adjustable
Dual component notched trowel, adjustable

TOTRWL-ADJ-SST-(2C-HNDL)-SERW8

Rust-proof trowel with 2-C handle
x 1 pcs
Dual component notched trowel, adjustable
Dual component notched trowel, adjustable

TOTRWL-ADJ-SST-(2C-HNDL)-SERW10

Rust-proof trowel with 2-C handle
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details