Float for Classic submersible pump
Float for Simer submersible pump
FLOAT-F.SUBMPMP-(SIMER CLASSIC)
Register now and access more than 125,000 products
Simple installation
The switch can be easily retrofitted with a few quick steps
Automatic activation by default with a water level of 7 mm and shut down at 2 mm
Individually adjustable
By shortening the electrodes, the automatic operation can be set so that the pump is only put into operation once a higher water level is reached.
Manual operation possible
Switch can also be activated manually, if the permanently installed switching bridge is shifted
IP68 tested
Datasheets(X)
In conjunction with Classic submersible pump, suitable for pumping flooded basements and and low-lying building areas dry. Draining pits and soakaways. Pumping out garden ponds and swimming pools when no persons are present. Extracting water during core drilling and concrete cutting work. Draining and refilling containers.
null | null |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Stone drill bit combi assortment FS 13 pieces
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Collated nails and gas cartridge NG CSM-1
WÜPOFAST® A2 chipboard screw A2 stainless steel, full thread, raised countersunk head, PZ
Hexagonal cap nut with clamping piece (non-metallic insert) DIN 986, A2 stainless steel, plain
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Valve setting blade
Stirrup handle On exterior plate