Floor sign - Use pedestrian walkway
MANTRYSIGN-PEDESTRIAN-WALKWAY-45CM
Art.-no. 0899605550
EAN 4068362497841
Register now and access more than 125,000 products
Increased work safety
- Clearly navigable workplace.
- Reduces the risk of accidents in traffic and work areas.
- Standards-compliant safety marking in accordance with ASR A1.3/DIN EN ISO 7010.
High resilience and a long service life
- Resistant to forklift traffic, even when regularly driven over.
- Designed for long-term use.
- Highly abrasion-resistant and durable, even when subject to intensive use.
- Non-slip due to the textured surface.
High-quality material and printing
- High-quality PP material.
- Does not turn brittle, even after long-term use.
- Printing is protected behind the film.
- Colour and symbol highly resistant to fading.
Quick and easy installation
- Self-adhesive back
- High-quality acrylate adhesive ensures outstanding adhesive strength on almost all smooth surfaces indoors and outdoors.
- Can be driven over immediately.
Resistant to environmental influences
- Resistant to moisture and chemicals.
- Resistant to plasticisers.
- Resistant to cleaning agents.
Maximum adhesive strength is achieved on clean, smooth surfaces. Uneven surfaces, especially outdoors, may result in reduced or non-permanent adhesion.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result.
Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
Can be used anywhere where pedestrians must use the intended pedestrian walkway or where there is an increased risk due to vehicle traffic and in-house transport. The floor sign is to be positioned directly at the entrance to the respective zone and in a highly visible location in front of the work area so that the requirement is clearly recognisable before entry or before starting work.
The highly durable floor sign is suitable for concrete, asphalt and a wide range of common industrial flooring. The thick adhesive layer ensures excellent adhesion even on lightly textured surfaces.
For optimal adhesion, the surface must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. The use of butyl primer is also recommended on certain surfaces, particularly concrete and asphalt.
When peeling, do not touch the adhesive area and try to remove the protective film in one piece. Immediately position and stick the floor sign in place. Press firmly. To ensure a particularly even finish, we recommend using a press-on roller.
Avoid air pockets and ensure correct positioning, as it will not be possible to remove it again, due to the high adhesive strength. The floor sign can be fully loaded immediately after application.
Diameter | 450 mm |
Thickness | 1 mm |
Material | PP - Polypropylene |
Min./max. processing temperature | 5 to 40 °C |
Shelf life from production/conditions | Unlimited / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |
Adhesive force at 25 mm / conditions | 30 N / in accordance to DIN EN ISO 29862 |
Silicone-free | Yes |
Paint-wetting impairment substances | No |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Hose clamp with asymmetrical lock
CERALINE dry sandpaper disc
Cylindrical grooved pin with chamfer ISO 8740, zinc plated steel
Akura 44 profile double cylinder
VARIFIX® connection bracket for system 41 Power Lock
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, zinc-plated, blue passivated (A2K)
Multi-purpose insert for hat/coat hooks
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Door handle A 803 on oval escutcheon
Setting tool For Fixanchor W-FAZ-IG