Floor sign - use eye protection
MANTRYSIGN-EYE-PROTECTION-45CM
Art.-no. 0899605552
EAN 4068362497780
Register now and access more than 125,000 products
Increased work safety
- Clearly navigable workplace.
- Reduction of accident risks in traffic and work areas.
- Standards-compliant safety marking in accordance with ASR A1.3/DIN EN ISO 7010.
High durability and long life
- Can be driven over regularly by stackers.
- Designed for continuous use.
- High abrasion resistance and very durable even under intensive use.
- Non-slip, textured surface.
High quality material and printing
- High-quality PP material.
- Does not turn brittle, even in long-term use.
- Printing is protected behind the film.
- Colours and symbols remain very clear.
Quick and easy installation
- Self-adhesive rear.
- High-quality acrylate adhesive for excellent adhesion on virtually all smooth substrates indoors and outdoors.
- Can be driven over immediately.
Resistant to environmental effects
- Resistant to moisture and chemicals.
- Resistant to plasticisers.
- Resistant to cleaning agents.
Maximum adhesive strength is achieved on clean, smooth surfaces. If applied to uneven surfaces, particularly outdoors, adhesion may be reduced or may not last as long.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result.
Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
For use anywhere eye protection is mandatory or where an increased risk of eye injury is present. The floor sign is to be positioned directly at the entrance to the respective zone and in a highly visible location in front of the work area so that the requirement is clearly recognisable before entry or before starting work.
The highly durable floor sign is suitable for concrete, asphalt and a wide range of common industrial flooring. Exhibits very strong adhesion even to slightly textured surfaces thanks to the thick layer of adhesive.
For optimal adhesion, the surface must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. The use of butyl primer is also recommended on certain surfaces - particularly concrete and asphalt.
When peeling, do not touch the adhesive area and try to remove the protective film in one piece. Immediately position and stick the floor sign in place. Press firmly. We recommend a pressure roller for a particularly uniform finish.
Avoid air pockets and ensure correct positioning, as it will not be possible to remove again due to the high adhesive force. The floor sign can be fully loaded immediately after application.
Diameter | 450 mm |
Thickness | 1 mm |
Material | PP - Polypropylene |
Gloss level | Matt |
Min./max. processing temperature | 5 to 40 °C |
Shelf life from production/conditions | Unlimited / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |
Adhesive force at 25 mm / conditions | 30 N / in accordance to DIN EN ISO 29862 |
Silicone-free | Yes |
Paint-wetting impairment substances | No |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Wound dressing
2-component toothed trowel
Clutch bit assortment, 3 pcs.
Pliers assortment 4 pieces
Hexagon socket bit assortment imperial, 4 pcs.
ASSY® D
plug screw countersunk head
System workshop trolley PRO 8.4
Clamping plate XI for MacPherson spring strut compressors
Designer shelf support
Front Glass For Powerquad LED work lamp