Fork head without split pin
DIN 71752 steel thick layer passivated LH
CLEVIS-DIN71752-LH-(DSP)-10X20
Register now and access more than 125,000 products
 | |
Diameter of hole (d1) | 10 mm |
Connection thread (d2) | M10 |
Length (l1) | 52 mm |
Slot length (l2) | 20 mm |
Width (a1) | 20 mm |
Internal width (b1) | 10 mm |
Material | Steel |
Surface | Zinc plated thick-layer passivation |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Abrasive fleece matting body For impressive surfaces, cleaning oxide coatings and removing discolouration
System box
GEFU® thread-rolling screw With Taptite 2000® thread, flat cylinder head and hexalobular drive
Red brass extensions With DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Type WX brad nail, zinc-plated steel, blue passivated (A2K)
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Work poloshirt
Flat gasket Aramid fibre AFM 34
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
