Formwork nail SN 105 With intended rupture point
Formwork nail SN 105
NL-FORMWRK-SN105-72MM
Register now and access more than 125,000 products
All nails are suitable for secondary attachments (without technical approval). The maximum tensile strength of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc plated |
Shank diameter (Øds) | 3.7 mm |
Head diameter (Ø dk) | 5.0 mm |
Shaft length (SL) | 72 mm |
Suitable for paling-board thickness (Ld) | 47 mm |
Suitable for device type | Würth BST 350, Hilti DX 2, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5, Hilti DX 6 |
Last viewed
WÜPOFAST® black oxide chipboard screw Steel, browned, full thread, countersunk head, PZ
A 507 FS door handle
Slotted raised countersunk head screw DIN 964, brass, plain
Staircase construction screw, metric thread
Handle
Countersunk screw with hexalobular head
Pan head tapping screw, shape C with Z recessed head ISO 7049, steel, zinc-plated, blue passivated, shape C (with tip)
Bolt with head
Work coat
Work polo shirt