Freely rotatable joint connection piece For hard-to-reach lubrication and manifold points
Connection piece freely-rotatable swivel
FITT-CLS-REVOLVHNGE-FMOV-M10X1KEG-M8X1
Register now and access more than 125,000 products
On central low-viscosity grease lubrication units:
Lines with a diameter of 4 mm are connected to connection pieces with tapered rings and union bolts M8x1.
On central grease lubrication units:
Lines with a diameter of 6 mm are connected to connection pieces with double-tapered rings and union bolts M10x1.
Datasheets(X)
For connection of a line to a movable lubrication or divider manifold point (subject to slow rotation).
 | |
Connection thread (d2) | M8 x 1 |
Outlet thread (d) | M10 x 1 tapered |
Width across flats (SW) | 15 mm |
Width across flats 2 (SW2) | 14 mm |
Material | Brass |
Surface | Plain |
Last viewed
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Screw with flattened half round head with hexagon socket, imperial
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
ASSY®plus VG 4 COMBI construction screw Steel zinc plated full thread hexagon head
Work vest
Work vest
Hexagonal bolt
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Straight reducer fitting ISO 8434-1, zinc-nickel-plated steel