Freezer spray
Freezer spray
FREZSPR-200ML
Register now and access more than 125,000 products
Non-flammable!
In low voltage areas according to VDE 0100 (voltage range: <50 V (AC), <120 V (DC)) can also be used when energised.
Powerful cooling effect
- Spray causes localised cooling down to –50°C
- Ball bearings, bushings, shafts etc. fit easily into the tightest clearances
Creates an intended thermal overload
Faults in electrical circuits are quick to determine
Meets EU regulation (EU no. 517/2014)
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For cooling transistors, resistors and engine parts in the automotive sector, e.g. carburettor and injection systems, in order to test the function of cold start equipment. For preventing heat damage in the area around the sites of soldering operations.
Contents | 200 ml |
Colour | Colourless |
Shelf life from production | 24 Month |
Density | 1.18 g/cm³ |
Density conditions | at 20°C |
Last viewed
T-piece, reduced with solder connection EN1254, copper, 5130R
Cold wood glue D2 Complies with stress group D2 in accordance with DIN EN 204
Low-cut safety shoes, S1
Designer shelf support with guide pins
Divider OrgaAer
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
Safety boots, S3
Pliers holder For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Castellated nut with fine thread DIN 935, steel 8, zinc-plated, blue passivated (A2K)
ECOFAST® chipboard screw Steel, zinc-plated yellow, partial thread, countersunk milling head, PZ drive