Gearbox oil TRIATHLON® Gear 80W
Gear oil, TRIATHLON Gear 80W
GEAROIL-GEAR-80W-20LTR
TRIATHLON
Register now and access more than 125,000 products
TRIATHLON gearbox oils are produced and packaged in compliance with the most stringent quality specifications in accordance with DIN EN ISO 9001
- High level of product safety
- Comprehensive manufacturer approvals
Only high-quality first raffinates and raw materials are used for TRIATHLON oils
Fulfils key specifications of automotive manufacturers
Prohibits wear and offers outstanding resistance to ageing
Please make sure that you select the viscosity class specified by the gearbox manufacturer. Miscible with all branded gearbox oils. Only fully effective when used unmixed. This information is based on careful investigation and may be considered reliable, however it should be considered advisory and without commitment.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Modern high-pressure gear oil, universally applicable in all types of gearboxes (spur gear, bevel gear and worm gear units) according to API classification GL 4.
Contents | 20 l |
Type of oil | Mineral |
Viscosity grade | 80W |
Approved for gear oils | API GL 4, MB 235.1, MAN 341 Type Z2, MAN 341 Type E1, MIL-L 2105 |
Recommended applications for gear oils | ZF 17A, ZF 02B |
Shelf life from production | 60 Month |
Density | 0.91 g/cm³ |
Density conditions | at 15°C |
Pour point | -27 °C |
ASTM colour code | 3.5 |
Last viewed
Die For standard metric ISO thread HSCo Multi Performance
Sealing plug GPN 300 F Polyethylene (PE-LD), natural
Connector, pneumatic
FLEXEN® PE
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Retaining hook
Customer service sticker
Connector, pneumatic
Red brass extensions With DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
Protective glove, nitrile