Gearbox oil TRIATHLON® Gear Cargo 75W-90
Gear oil, TRIATHLON Gear Cargo 75W-90
GEAROIL-(GEAR-CARGO)-75W90-60LTR
TRIATHLON
Register now and access more than 125,000 products
TRIATHLON gearbox oils are produced and packaged in compliance with the most stringent quality specifications in line with DIN EN ISO 9001
- High product safety
- Extensive manufacturer approvals
Only high-quality first raffinates and raw materials are used in TRIATHLON oils
Satisfies key specifications of automotive manufacturers
Reduces friction and saves fuel
Observe the operating instructions of the vehicle and engine manufacturer for standard and extended oil change intervals.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Multigrade gear oil for universal use in commercial vehicles.
Contents | 60 l |
Type of oil | Partly synthetic |
Viscosity grade | 75W-90 |
Approved for gear oils | API GL 4, API GL 5, API MT1, MIL-L 2105 D, MIL-PRF 2105 E |
Recommended applications for gear oils | DAF, Eaton, Scania STO 1:0, Volvo (axles), ZF-TE-ML 12E, ZF-TE-ML 16B, ZF-TE-ML 17B, ZF-TE-ML 19B, MAN M3343 Type M |
Shelf life from production | 60 Month |
Density | 0.89 g/cm³ |
Density conditions | at 15°C |
Min. flashing point | 180 °C |
Pour point | -43 °C |
ASTM colour code | 2 |
Last viewed
System bolt With expanding socket for system connector SV 20 E
Safety boots, S2
Safety shoe S3 Base B0178
W-VIZ-A anchor rod, high corrosion resistance steel for W-VIZ/HCR injection systems (concrete)
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, NPT male thread
Cordless drywall screwdriver ATS 18 AUTOMATIC M-CUBE
T-piece branch pipe, reduced EN10242 B1, plain, malleable iron
L-shaped push-in fitting with male and female thread
Sealant Seal Flex
Breathing mask 3M 9322+Gen3 FFP2