Gearwheel spray - COGWHLSPR-BLACK-400ML - 1

Gearwheel spray - COGWHLSPR-BLACK-400ML - 2

Gearwheel spray

Name: Gearwheel spray
Brand: Würth
SKU: 08931055

Cogwheel spray
COGWHLSPR-BLACK-400ML

Art.-no. 08931055

EAN 4049557424842

All versions

Prices for customers after login

Gearwheel spray

Art.-no. 08931055

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

Black, shear-resistant, high-pressure resistant special lubricant

Resistant to high pressures

Reliable protection against wear even under high pressure demands

Noise- and vibration-damping

Shear-resistant

Excellent lubrication including for fast rotating lubrication points

Addition of solid lubricants

Has good emergency running properties (the solid lubricant prevents extreme wear in critical phases of removing the lubricating film).

Contains corrosion protection additives

Penetrates moisture and protects against corrosion

O-ring compatible

Resistant to spray water and salt water, as well as to weak acids and bases

Silicone-, resin-, acid- and bitumen-free

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Black, shear-resistant, high-pressure resistant special lubricant. Excellent for rapidly rotating lubrication points.

Especially suited for exposed lubricating points that are exposed to water or weather influences. For use on covered or exposed toothed rings on winches and crushing plants, gearwheels and turntables on cranes and diggers, toothed racks, chains, pinions, gearboxes etc. for indoor and outdoor use.

Instructions

Clean and degrease the workpiece. Shake can vigorously before use. Evenly spray lubricating point from a distance of approx. 20 cm. With running gearwheels, always point the continuous spray jet at the same area. Turn the can 180° and spray for approx. 5 seconds after use. Soiled lubrication points must be thoroughly cleaned and degreased with Power Cleaner for Assembly Plus, art. no. 0890107003, prior to application.

Chemical basis	Mineral oil with polybutene
Oil basis	Mineral oil
Colour	Black
Smell/fragrance	Gasoline
Density	0.74 g/cm³
Min. dripping point	140 °C
Dripping point conditions	in accordance with DIN ISO 2176
Min. temperature conditions	-30 °C
Max. temperature conditions	180 °C
Resistance against	Salt water Weak lyes Weak acids Splash
Silicone-free	Yes
Bitumen-free	Yes
Resin-free	Yes
Acid-free	Yes
AOX-free	Yes
Contents	400 ml
Weight of content	251.6 g
Container	Can
Shelf life from production	24 Month

Required accessory:

Product

Description

Quantity

Price
/PU

1A assembly cleaner

ASMBYCLNR-1A-500ML

Art.-no. 0890106500

Highly active and safe assembly and parts cleaner

x 24 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.