Glue for painted surfaces

Name: Glue for painted surfaces
Brand: Würth
SKU: 089210055

Lacquer glue
LACGLU-1C-500G

Art.-no. 089210055

EAN 4062856357505

All versions

Prices for customers after login

Glue for painted surfaces

Art.-no. 089210055

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

For gluing on painted and plastic surfaces

Excellent paint adhesion

Broad range of applications and excellent adhesion to many common painted surfaces without the need for sanding.

High gluing quality

Fast-hardening dispersion glue with excellent paint adhesion. Good resistance to moisture and heat. Hardened glued joints are viscoplastic. Causes no discolouration.

Broad range of applications

Can be applied manually and in glue pressure containers.

Notice

Due to the large number of paint systems and plastics, it is necessary to conduct your own tests regarding adhesion properties. In conjunction with the tannic acid of the wood, the impact on bare metal may result in blue discolouration, especially with oak. When gluing painted and plastic surfaces, one component to be joined must be absorbent. Not suitable for hard PVC surfaces. Always close the bottle after use. Protect from frost.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Indoors with occasional brief exposure to water flowing off or condensation water. Gluing trim strips, wood and wood materials onto DD/water/SH paints, HPL panels, DKS surfaces, melamine resin surfaces, polyester surfaces and nitrocoatings. Gluing units with melamine resin-coated and painted surfaces. Gluing, e.g. of cabinets, internal doors, kitchen worktops, door frames, tables, corner benches.

Instructions

At least one component to be joined must be absorbent. Apply a thin, even layer of glue for painted surfaces on one side with a glue bottle, glue roller, glue spatula, glue brush or application machine. For more information, please refer to the technical data sheet.

Chemical basis	Synthetic resin dispersion
Container	Bottle
Weight of content	0.5 kg
Density	1.01 g/cm³
Silicone-free	Yes
Colour	Beige
pH value	8.0
Min. film forming temperature	5 °C
Min./max. open time /conditions	6-8 min / at 20°C and 150 g/m²
Max. post-bonding time	3 h
Max. temperature resistance of the hardened material	80 °C
Min. room temperature, material temperature and glue temperature	18 °C
Min./max. processing temperature	10 to 40 °C
Min. pressing pressure	0.2 N/mm²
Min. press-setting time	15 min
Conditions for press-setting time	specified processing conditions: a joint part must be able to absorb moisture
Min./max. wood moisture	8-10 %

Additive article:

Product

Description

Quantity

Price
/PU

Glue spatula

GLUSPTLA-ABS-COGGING-4MM

Art.-no. 0891185

For applying all common surface and assembly glues to all wood types

x 3 pcs

Glue roller With polyurethane roller

GLUROLL-(FILLVOLUME-1KG)

Art.-no. 0891186

For the rapid and even application of glue during edge and surface gluing.

x 1 pcs

Polyurethane roller With ribbed, non-porous surface

ROLL-F.GLUROLL-PUR

Art.-no. 0891187

Enables even application of glue

x 1 pcs

Foam roller With porous, rough surface

ROLL-F.GLUROLL-FM

Art.-no. 0891188

Enables thick application of glue

x 1 pcs

Inner plastic roller With ribbed, non-porous surface

ROLL-F.GLUROLL-PLA-IN

Art.-no. 0891189

For edge gluing

x 1 pcs

Glue dispenser unit For glue application

DSP-GLU-EMPTY-500ML

Art.-no. 08921000

x 1 pcs

Economy glue container For glue application

GLUCONT-EMPTY-1500G

Art.-no. 089210001

x 1 pcs

Assembly adhesive

ASMBYADH-CART-310ML

Art.-no. 0892100100

Assembly adhesive for fast and high-strength adhesive bonding for indoor and outdoor applications

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 1

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 1

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.