Grid spacer block
Grid spacer block
SPCEBLOCK-MESH-PLA-BLACK-160X75X20MM
Register now and access more than 125,000 products
- Material: Plastic, PP/polypropylene
- Stackable with anti-slip protection
- Pressure test up to 8 tonnes (from 5 mm)
For aligning formwork elements, pre-fabricated concrete and wood parts, lift-sliding doors, window elements, wood constructions etc.
The load capacity of the base material in question is critical for calculating the compressive strength, as is the load capacity of the block. Not for long-term outdoor use; avoid direct exposure to UV radiation.
Datasheets(X)
Length | 160 mm |
Width | 75 mm |
Thickness | 20 mm |
Material | PP - Polypropylene |
Colour | Black |
Last viewed
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 A2 stainless steel
Hexagonal bolt with shank DIN 931, steel 8.8, plain
Hexagon socket screw-in nut with collar DIN 908, steel, zinc-plated, blue passivated (A2K)
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, A2 stainless steel, shape C (with tip)
EcoFresh S1PL safety shoe
Locking hook
Door handle A 410
Ducting clamp Part 1 – Light series
EPS profile thumbturn cylinder
Universal wire holder For VKW wiring duct