Grinding file belt Klingspor CS 411 Y
File belt alumina-zirconia Klingspor CS 411 Y
GRNDROLL-KLINGSPOR-286888-9X533-G80
Register now and access more than 125,000 products
The waterproof sanding belt type CS 411 Y can be used for a variety of metalworking applications. Examples include aircraft construction, the automotive industry, the manufacture of pipes and railings as well as equipment engineering and container construction.
The tear-resistant polyester backing ensures a high load-bearing capacity. The grit is made of self-sharpening zirconia alumina. This ensures a high level of aggressiveness and thus a very good removal rate. The machining of stainless steel is also optimised by special active sanding agents in the size coat. These prevent premature vitrification of the abrasive grain.
Datasheets(X)
Width x length | 9 mm x 533 mm |
Grid size | 80 |
Material of abrasive medium | Zirconium conrundum |
Backing material | Y-polyester |
Last viewed
Split pin ISO/WN 1234 steel zinc-plated
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Screw with flattened half round head and hexagon socket ISO 7380-1 A4-070 stainless steel, plain
Polo shirt Job+
Twist drill bit HSS DIN 338 type RN 118°
Cut protection glove
Jacket Planam Plaline
Work poloshirt
Polo shirt Job+
Hexagonal bolt, with thread to head and fine thread ISO 8676, steel 8.8, plain