Grinding file belt Klingspor CS 411 Y
File belt alumina-zirconia Klingspor CS 411 Y
GRNDROLL-KLINGSPOR-302791-20X520-G60
Register now and access more than 125,000 products
The waterproof sanding belt type CS 411 Y can be used for a variety of metalworking applications. Examples include aircraft construction, the automotive industry, the manufacture of pipes and railings as well as equipment engineering and container construction.
The tear-resistant polyester backing ensures a high load-bearing capacity. The grit is made of self-sharpening zirconia alumina. This ensures a high level of aggressiveness and thus a very good removal rate. The machining of stainless steel is also optimised by special active sanding agents in the size coat. These prevent premature vitrification of the abrasive grain.
Datasheets(X)
Width x length | 20 mm x 520 mm |
Grid size | 60 |
Material of abrasive medium | Zirconium conrundum |
Backing material | Y-polyester |
Last viewed
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Jacket Planam Plaline
Plus Quadro-L Vario hammer drill bit
Lock piece For multiple locks with 2 bolts/2 power wedges or 2/4 bolts
HSCo8 end mill, short, centre-cutting DIN 844K
EPS profile thumbturn cylinder
OrgaAer skirting profile For hanging frames
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Divider assortment With compartment rails and compartment dividers for system dimensions 12.6
Cover cap for number plate screw Article prefix number 0210