Grommet Brass, MS 63 F 30, nickel-plated
Rosette brass nickel-plated, shape 1
ROS-BRS-(E2J)-4,1X9,0X1,8
Register now and access more than 125,000 products
Grommets are used as a spacer for various countersunk screws. They are used as washers and alignment aids, as well as to equalise the pressure on the parts that need to be secured, particularly if soft materials such as wood, plastic, leather, etc. are used.
Datasheets(X)
CAD data (available after login)
 | |
Internal diameter (d1) | 4.1 mm |
Outer diameter (d2) | 9 mm |
Height (h1) | 1.8 mm |
Material | Brass |
Surface | Nickel plated |
Last viewed
Locking system DUAL
Hexagonal bolt with thread up to the head DIN 933, steel 10.9, zinc-plated, blue passivated (A2K)
Double nipple, imperial thread
Pan head tapping screw, shape C with Z recessed head ISO 7049, steel, zinc-plated, blue passivated, shape C (with tip)
Brass spacer stud
Hammer drill bit Max Quadro-L Vario
System connector SV 20 E, twin-pin
ECOFAST® chipboard screw
Work trousers
PVC single core H05/H07V-K, fine wire