Grooved ball bearings, POP FAG
Deep groove ball bearings, POP FAG
DPGRV-BALBEAR-629-C-2HRS-C3
Register now and access more than 125,000 products
Deep groove ball bearings are versatile and can be used in almost all machines, vehicles and devices.
Single-row deep groove ball bearings can withstand radial and axial loads at high velocities.
Deep groove ball bearings are available both with a low friction rubber U ring and with a frictionless metal shield.
- RSR:abrasive rubber seal on one side of the bearing
- 2RSR:abrasive rubber seal on both sides of the bearing
- HRS:abrasive rubber seal on one side of the bearing (new rubber seal model)
- 2HRS:abrasive rubber seal on both sides of the bearing(new rubber seal model)
- Z:non-abrasive sheet metal protection plate on one side only
- 2Z:non-abrasive sheet metal protection plate on both sides
- C:without the number on the back, new generation deep groove ball bearing
- S:in front of the basic marking (S6205) on the bearing, stainless bearing
- C2:clearance tighter than the standard
- CN:standard bearing clearance, not marked on the bearing
- C3:larger than standard bearing clearance, the rolling element has a little more space between the bearing rings
- C4:more space than with a C3 clearance
- K:conical inner hole 1:12
- Grooved ball bearings without retainer marking steel
- TVH:glass fibre reinforced polyamide holder
- TB:Hard weave holder
- M , M1:solid brass holder for rolling elements, guiding
- MA:brass holder, outer ring guidance
- Y:brass plate holder
- A:modified inner structure
- J20AA:electrical insulation 3000 V
 | |
Internal diameter (d) | 9 mm |
Outer diameter (D) | 26 mm |
Width (B) | 8 mm |
Number of seals | 2 PCS |
Product weight (per item) | 19.000 g |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Solid carbide end mill, short, triple blade
Work jacket
1C assembly foam PURlogic® Easywhite
Wrench holder For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Stainless steel security door fitting S 202
Thermal mug Crema
Hexagon nut with clamping piece (all-metal)
Solid carbide single-tooth cutter, plastic, right-hand cutting with left twist
TX bit C 6.3 (1/4 inch) with hole
Red brass extensions With DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
