Grooved nut DIN 981, steel, plain, for clamping sleeve
DIN 981 steel plain
NUT-SL-DIN981-KM8-M40X1,5
Register now and access more than 125,000 products
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter x pitch (D) | M40 x 1.5 |
Outer diameter (d1) | 58 mm |
Height (h1) | 9 mm |
Standards | DIN 981 |
Form | KM |
Material | Steel |
Min. tensile strength | 350 N/mm² |
Surface | Plain |
Thread type | Metric thread |
RoHS-compliant | Yes |
Last viewed
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Twist drill bit HSS DIN 338 type RN 130°
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Plastic frame anchor W-UR 10 XS W-UR 10 XS for use in perforated brick with small chambers and thin webs in conjunction with the AMO Combi screw
Flat head tapping screw, type C with hexagon socket ISO 14585, A2 stainless steel, shape C (with tip)
Lintel casing bracket set for closing sequence controls on the non-hinge side (SR-BG)
Hexagon Socket Head Cap Screw with low Head DIN 7984, A2-070 stainless steel, plain
Low-cut safety shoes S2
Taper-grooved dowel pin ISO 8745 steel plain
Pan head tapping screw, shape C with AW drive