HSCo DIN 338 SMART STEP twist drill bit assortment 29 pcs - DRL-MET-SET-HSCO-DIN338-SMARTSTEP-29PCS

HSCo DIN 338 SMART STEP twist drill bit assortment 29 pcs - DRL-MET-SET-HSCO-DIN338-SMARTSTEP-29PCS - 1

HSCo DIN 338 SMART STEP twist drill bit assortment 29 pcs - DRL-MET-SET-HSCO-DIN338-SMARTSTEP-29PCS - 2

HSCo DIN 338 SMART STEP twist drill bit assortment 29 pcs - DRL-MET-SET-HSCO-DIN338-SMARTSTEP-29PCS - 3

HSCo DIN 338 SMART STEP twist drill bit assortment 29 pcs - DRL-MET-SET-HSCO-DIN338-SMARTSTEP-29PCS - 4

HSCo DIN 338 SMART STEP twist drill bit assortment 29 pcs - DRL-MET-SET-HSCO-DIN338-SMARTSTEP-29PCS - 5

HSCo DIN 338 SMART STEP twist drill bit assortment 29 pcs - DRL-MET-SET-HSCO-DIN338-SMARTSTEP-29PCS - 6

HSCo DIN 338 SMART STEP twist drill bit assortment 29 pcs - DRL-MET-SET-HSCO-DIN338-SMARTSTEP-29PCS - 7

HSCo DIN 338 SMART STEP twist drill bit assortment 29 pcs

Name: HSCo DIN 338 SMART STEP twist drill bit assortment 29 pcs
Brand: Würth
SKU: 0626940029

Tw. drill bit HSCo DIN 338 SMART STEP 29 pcs. Syska
DRL-MET-SET-HSCO-DIN338-SMARTSTEP-29PCS
ZEBRA SMART STEP

Art.-no. 0626940029

EAN 4065746543194

All versions

Similar products

Prices for customers after login

HSCo DIN 338 SMART STEP twist drill bit assortment 29 pcs

Art.-no. 0626940029

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

The multi-performance drill bit with unique SMART STEP technology (from dia. 2.5 mm) for high-precision circular drilling in hand-held use in almost all materials, such as stainless steel (e.g. V2A, V4A), heat-resistant steels and titanium. Also for general applications in conventional steel up to 1,200 N/mm², as well as in cast iron, non-ferrous metals, hard and softwood. Available in the ORSY^®system cassette including the four additional intermediate sizes dia. 3.3, 4.2, 6.8 and 10.2 mm for M3-M12 threads.

Newly designed stepped drill bit tip geometry (from dia. 2.5 mm)

Significantly faster than conventional twist drill bits

Significantly more energy-efficient drilling compared to conventional twist drill bits

Precise circular holes without centre-punching

Extremely comfortable drilling

Saves pre-drilling, precise spot drilling without running off centre

Angled drilling possible

Simple boring or enlarging of an existing drill hole

Perfect for drilling out rivets

Ideal for drilling in round material or tubes with stringent requirements on centring, precision and service life, e.g. in railing construction

3-flat shank (from dia. 4 mm)

No spinning in the drill chuck: faster, more comfortable working

Optimal power transmission

Protects the drill chuck from damage

Little effort required to open and close the drill chuck

Suitable for the ORSY^® system, compact and practical system cassette with useful details, such as stackability, optimised joint and simple opening

Notice

For blind holes, please observe the extended drill tip!

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Perfect for drilling in round tubes (e.g. in railing construction), for drilling out stud bolts, rivet holes, for drilling sheet metal and thin-walled profile materials

Ideal for high-precision, comfortable and fast working in solid material

Ideal for large drill hole diameters

Number of pieces in assortment/set	29 PCS
Quality	ZEBRA-Premium
Standard / drilling depth	DIN 338 / 5xD
Shank style	3-face shank
Material to be processed	Steel Cast iron Stainless steel Titanium Non-ferrous metal Wood Hardwood
Material of sub-group	General structural steels Non-alloyed tempering steels Alloyed tempering steels Nitriding steels Tool steels High-speed steels Cast iron Ductile iron Malleable cast iron White cast iron Stainless steels, sulphurated Stainless steels, austenitic Stainless steels, martensitic Titanium Titanium alloys Spring steels Aluminium Aluminium alloys Aluminium wrought alloys Aluminium casting alloys (<10% silicon) Magnesium alloys Copper, low-alloyed Brass, short-chipping Brass, long-chipping Bronze, short-chipping Bronze, long-chipping Plastics, thermoset Plastics, thermoplastic Plastics, aramide-fibre reinforced Plastics, glass/carbon-fibre-reinforced
Surface	Oxide finish
Cutting material	HSCo
Suitable for drill (points system)	4 of 4 points
Suitable for cordless drills (points system)	4 of 4 points
Suitable for upright drilling machine (points system)	4 of 4 points
Service life (points system)	3 of 4 points
Drilling speed (point system)	4 of 4 points
Bore hole quality (point system)	4 of 4 points
Versatility (points system)	4 of 4 points
Drilling behaviour (point system)	4 of 4 points
Self-centring	Yes

Cutting values
For dia. 1.0-2.5
Material designation	Tensile strength			from dia. 1.0			from dia. 2.0			from dia. 2.5
		v_c		n		f	n		f	n		f
		from	to	from	to		from	to		from	to
Steels
General structural steels	≤ 850 N/mm²	18	27	5732	8598	0,011	2866	4299	0,013	2292	3439	0,017
Unalloyed quenched and tempered steels	≤ 850 N/mm²	18	27	5732	8598	0,011	2866	4299	0,013	2292	3439	0,017
Low-alloy quenched and tempered steels	≤ 850 N/mm²	18	27	5732	8598	0,011	2866	4299	0,013	2292	3439	0,017
Unalloyed quenched and tempered steels	≤ 1,000 N/mm²	15	23	4777	7324	0,01	2388	3662	0,012	1910	2929	0,014
Low-alloy quenched and tempered steels	≤ 1,000 N/mm²	15	23	4777	7324	0,01	2388	3662	0,012	1910	2929	0,014
Alloyed quenched and tempered steels	≤ 1,000 N/mm²	10	15	3184	4777	0,01	1592	2388	0,012	1273	1910	0,014
Nitriding steels	≤ 1,000 N/mm²	10	15	3184	4777	0,01	1592	2388	0,012	1273	1910	0,014
Tool steels	≤ 1,000 N/mm²	10	15	3184	4777	0,01	1592	2388	0,012	1273	1910	0,014
High-speed steels	≤ 1,000 N/mm²	10	15	3184	4777	0,01	1592	2388	0,012	1273	1910	0,014
High-grade steels
Stainless steels	1,200 N/mm²	8	12	2547	3821	0,01	1273	1910	0,012	1019	1518	0,014
Titanium	850 N/mm²	6	10	1910	3183	0,008	955	1592	0,01	764	1273	0,012
Cast metals
Cast iron	≤ 350 HB	15	23	4777	7324	0,01	2388	3662	0,012	1910	2929	0,014
Spheroidal graphite and malleable iron	≤ 350 HB	15	23	4777	7324	0,01	2388	3662	0,012	1910	2929	0,014
Non-ferrous metals
Aluminium	≤ 600 N/mm²	35	45	11146	14331	0,011	5573	7165	0,013	4458	5732	0,016
Plastics
Thermosetting plastics		15	23	4777	7324	0,012	2388	3662	0,014	1910	2929	0,017
Thermoplastic plastics		15	23	4777	7324	0,012	2388	3662	0,014	1910	2929	0,017
Wood
Soft and light wood		21	30	6688	9554	0,013	3344	4777	0,015	2675	3821	0,018
Compact and hard wood		18	27	5732	8598	0,011	2866	4299	0,014	2292	3439	0,016

For dia. 3.15-5.0
Material designation	Tensile strength			from dia. 3.15			from dia. 4.0			from dia. 5.0
		v_c		n		f	n		f	n		f
		from	to	from	to		from	to		from	to
Steels
General structural steels	≤ 850 N/mm²	18	27	1819	2729	0,019	1433	2149	0,022	1146	1719	0,027
Unalloyed quenched and tempered steels	≤ 850 N/mm²	18	27	1819	2729	0,019	1433	2149	0,022	1146	1719	0,027
Low-alloy quenched and tempered steels	≤ 850 N/mm²	18	27	1819	2729	0,019	1433	2149	0,022	1146	1719	0,027
Unalloyed quenched and tempered steels	≤ 1,000 N/mm²	15	23	1516	2325	0,017	1194	1831	0,020	955	1464	0,023
Low-alloy quenched and tempered steels	≤ 1,000 N/mm²	15	23	1516	2325	0,017	1194	1831	0,020	955	1464	0,023
Alloyed quenched and tempered steels	≤ 1,000 N/mm²	10	15	1011	1516	0,017	796	1194	0,020	636	955	0,023
Nitriding steels	≤ 1,000 N/mm²	10	15	1011	1516	0,017	796	1194	0,020	636	955	0,023
Tool steels	≤ 1,000 N/mm²	10	15	1011	1516	0,017	796	1194	0,020	636	955	0,023
High-speed steels	≤ 1,000 N/mm²	10	15	1011	1516	0,017	796	1194	0,020	636	955	0,023
High-grade steels
Stainless steels	1,200 N/mm²	8	12	808	1213	0,017	636	955	0,02	509	764	0,023
Titanium	850 N/mm²	6	10	606	1011	0,015	477	796	0,018	382	637	0,021
Cast metals
Cast iron	≤ 350 HB	15	23	1516	2325	0,017	1194	1831	0,020	955	1464	0,023
Spheroidal graphite and malleable iron	≤ 350 HB	15	23	1516	2325	0,017	1194	1831	0,020	955	1464	0,023
Non-ferrous metals
Aluminium	≤ 600 N/mm²	35	45	3538	4549	0,018	2786	3582	0,022	2229	2866	0,027
Plastics
Thermosetting plastics		15	23	1516	2325	0,019	1194	1831	0,023	955	1464	0,028
Thermoplastic plastics		15	23	1516	2325	0,019	1194	1831	0,023	955	1464	0,028
Wood
Soft and light wood		21	30	2123	3033	0,019	1672	2388	0,024	1338	1910	0,029
Compact and hard wood		18	27	1819	2729	0,019	1433	2149	0,023	1146	1719	0,028

For dia. 6.3-10.0
Material designation	Tensile strength			from dia. 6.3			from dia. 8.0			from dia. 10.0
		v_c		n		f	n		f	n		f
		from	to	from	to		from	to		from	to
Steels
General structural steels	≤ 850 N/mm²	18	27	909	1364	0,029	716	1074	0,032	573	859	0,037
Unalloyed quenched and tempered steels	≤ 850 N/mm²	18	27	909	1364	0,029	716	1074	0,032	573	859	0,037
Low-alloy quenched and tempered steels	≤ 850 N/mm²	18	27	909	1364	0,029	716	1074	0,032	573	859	0,037
Unalloyed quenched and tempered steels	≤ 1,000 N/mm²	15	23	758	1162	0,027	597	915	0,030	477	732	0,033
Low-alloy quenched and tempered steels	≤ 1,000 N/mm²	15	23	758	1162	0,027	597	915	0,030	477	732	0,033
Alloyed quenched and tempered steels	≤ 1,000 N/mm²	10	15	505	758	0,027	398	597	0,030	318	477	0,033
Nitriding steels	≤ 1,000 N/mm²	10	15	505	758	0,027	398	597	0,030	318	477	0,033
Tool steels	≤ 1,000 N/mm²	10	15	505	758	0,027	398	597	0,030	318	477	0,033
High-speed steels	≤ 1,000 N/mm²	10	15	505	758	0,027	398	597	0,030	318	477	0,033
High-grade steels
Stainless steels	1,200 N/mm²	8	12	404	606	0,027	318	477	0,03	254	382	0,033
Titanium	850 N/mm²	6	10	303	505	0,025	239	398	0,028	191	318	0,031
Cast metals
Cast iron	≤ 350 HB	15	23	758	1162	0,027	597	915	0,030	477	732	0,033
Spheroidal graphite and malleable iron	≤ 350 HB	15	23	758	1162	0,027	597	915	0,030	477	732	0,033
Non-ferrous metals
Aluminium	≤ 600 N/mm²	35	45	1769	2274	0,029	1393	1791	0,032	1114	1433	0,037
Plastics
Thermosetting plastics		15	23	758	1162	0,030	597	915	0,033	477	732	0,038
Thermoplastic plastics		15	23	758	1162	0,030	597	915	0,033	477	732	0,038
Wood
Soft and light wood		21	30	1061	1516	0,031	836	1194	0,034	668	955	0,039
Compact and hard wood		18	27	909	1364	0,031	716	1074	0,033	573	859	0,037

For dia. 12.5-20.0
Material designation	Tensile strength			from dia. 12.5			from dia. 16.0			from dia. 20.0
		v_c		n		f	n		f	n		f
		from	to	from	to		from	to		from	to
Steels
General structural steels	≤ 850 N/mm²	18	27	458	687	0,040	358	537	0,042	286	430	0,044
Unalloyed quenched and tempered steels	≤ 850 N/mm²	18	27	458	687	0,040	358	537	0,042	286	430	0,044
Low-alloy quenched and tempered steels	≤ 850 N/mm²	18	27	458	687	0,040	358	537	0,042	286	430	0,044
Unalloyed quenched and tempered steels	≤ 1,000 N/mm²	15	23	382	585	0,037	298	457	0,040	238	366	0,042
Low-alloy quenched and tempered steels	≤ 1,000 N/mm²	15	23	382	585	0,037	298	457	0,040	238	366	0,042
Alloyed quenched and tempered steels	≤ 1,000 N/mm²	10	15	254	382	0,037	199	298	0,040	159	238	0,042
Nitriding steels	≤ 1,000 N/mm²	10	15	254	382	0,037	199	298	0,040	159	238	0,042
Tool steels	≤ 1,000 N/mm²	10	15	254	382	0,037	199	298	0,040	159	238	0,042
High-speed steels	≤ 1,000 N/mm²	10	15	254	382	0,037	199	298	0,040	159	238	0,042
High-grade steels
Stainless steels	1,200 N/mm²	8	12	203	305	0,037	159	238	0,04	109	168	0,042
Titanium	850 N/mm²	6	10	153	255	0,035	119	199	0,038	79	129	0,04
Cast metals
Cast iron	≤ 350 HB	15	23	382	585	0,037	298	457	0,040	238	366	0,042
Spheroidal graphite and malleable iron	≤ 350 HB	15	23	382	585	0,037	298	457	0,040	238	366	0,042
Non-ferrous metals
Aluminium	≤ 600 N/mm²	35	45	891	1146	0,040	696	895	0,041	557	716	0,044
Plastics
Thermosetting plastics		15	23	382	585	0,041	298	457	0,042	238	366	0,044
Thermoplastic plastics		15	23	382	585	0,041	298	457	0,042	238	366	0,044
Wood
Soft and light wood		21	30	535	764	0,042	418	597	0,045	334	477	0,047
Compact and hard wood		18	27	458	687	0,039	358	537	0,042	286	430	0,044

Key
v_c = cutting speed [m/min]
f = feed [mm/r]
n = rotation speed [rpm]
The suggested cutting values are reference values and must be adapted to the respective conditions.

HSCo DIN 338 SMART STEP twist drill bit assortment 29 pcs including:

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D1,0

ZEBRA SMART STEP

Art.-no. 0626940100

Description:

1.0

The multi-performance drill bit with unique SMART STEP technology (from dia. 2.5 mm) for manually drilled high-precision circular holes in almost all materials, such as stainless steel (e.g. V2A, V4A), heat-resistant steels and titanium. Also suitable for general applications in conventional steel up to 1200 N/mm² strength as well as in cast iron, non-ferrous metals, hardwood and softwood.

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D1,5

ZEBRA SMART STEP

Description:

1.5

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D2,0

ZEBRA SMART STEP

Description:

2.0

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D2,5

ZEBRA SMART STEP

Description:

2.5

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D3,0

ZEBRA SMART STEP

Description:

3.0

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D3,3

ZEBRA SMART STEP

Description:

3.3

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D3,5

ZEBRA SMART STEP

Description:

3.5

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D4,0

ZEBRA SMART STEP

Art.-no. 0626940400

Description:

4.0

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D4,2

ZEBRA SMART STEP

Description:

4.2

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D4,5

ZEBRA SMART STEP

Description:

4.5

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D5,0

ZEBRA SMART STEP

Description:

5.0

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D5,5

ZEBRA SMART STEP

Description:

5.5

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D6,0

ZEBRA SMART STEP

Description:

6.0

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D6,5

ZEBRA SMART STEP

Description:

6.5

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D6,8

ZEBRA SMART STEP

Description:

6.8

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D7,0

ZEBRA SMART STEP

Description:

7.0

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D7,5

ZEBRA SMART STEP

Description:

7.5

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D8,0

ZEBRA SMART STEP

Description:

8.0

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D8,5

ZEBRA SMART STEP

Description:

8.5

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D9,0

ZEBRA SMART STEP

Description:

9.0

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D9,5

ZEBRA SMART STEP

Art.-no. 0626940950

Description:

9.5

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D10,0

ZEBRA SMART STEP

Description:

10.0

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D10,2

ZEBRA SMART STEP

Art.-no. 0626941020

Description:

10.2

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D10,5

ZEBRA SMART STEP

Description:

10.5

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D11,0

ZEBRA SMART STEP

Art.-no. 0626941100

Description:

11.0

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D11,5

ZEBRA SMART STEP

Description:

11.5

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D12,0

ZEBRA SMART STEP

Description:

12.0

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D12,5

ZEBRA SMART STEP

Description:

12.5

Quantity: 1 x

1 x

Twist drill bit HSCO DIN 338 SMART STEP

DRL-TWST-MET-DIN338-HSCO-SMARTSTEP-D13,0

ZEBRA SMART STEP

Description:

13.0

Quantity: 1 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additional accessory:

Product

Description

Quantity

Price
/PU

CUT+COOL drilling and cutting oil

CUTOIL-DRILL-(CUT-COOL)-400ML

Art.-no. 0893050004

Multi cutting oil for light to medium machining work

Drilling and cutting foam CUT+COOL

CUTFM-DRL-(CUT-COOL)-400ML

Art.-no. 0893050007

Highly active, high-performance cutting foam for all machining work.

CUT+COOL Perfect drilling and cutting oil

CUTOIL-PERFECT-(CUT-COOL)-400ML

Art.-no. 0893050008

High-performance cutting oil for the heaviest machining work and higher cutting speeds

Cut and Cool Perfect drilling/cutting paste

CUTPAST-DRILL-(CUT-COOL-PERFECT)-500ML

Art.-no. 0893050010

Optimum results and safety for all materials and applications

Cordless drill driver ABS 18 POWER M-CUBE

DRLDRIV-CORDL-(ABS 18 POWER)-2X4AH-8.4.2

MASTER M-CUBE

Art.-no. 5701404004

Very powerful, handy cordless drill driver specially designed for hard use on construction sites with a torque of 140 Nm

x 1 pcs

ABS 18 COMPACT M-CUBE cordless drill/driver

DRLDRIV-CORDL-(ABS 18 COMPACT)-2X4.0AH

MASTER M-CUBE

Art.-no. 57018002

Compact, powerful and brushless cordless drill screwdriver for moderate screwing and drilling work, developed by Würth to meet the requirements of tradesperson

x 1 pcs