HSCo Multi Performance combination tap - MATAP-COMBI-HSCO-MULTI-PERFORMANCE-M3

HSCo Multi Performance combination tap - MATAP-COMBI-HSCO-MULTI-PERFORMANCE-M3 - 1

HSCo Multi Performance combination tap - MATAP-COMBI-HSCO-MULTI-PERFORMANCE-M3 - 2

HSCo Multi Performance combination tap

Name: HSCo Multi Performance combination tap
Brand: Würth
SKU: 0658500300

Combi screw tap, HSCo, Multi Performance
MATAP-COMBI-HSCO-MULTI-PERFORMANCE-M3
ZEBRA

Art.-no. 0658500300

EAN 4062856142521

All versions

Similar products

Prices for customers after login

HSCo Multi Performance combination tap

Art.-no. 0658500300

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Premium combination screw tap for precise drilling, thread cutting and countersinking/deburring in just one operation, now also for thicker workpieces with a material thickness of up to 2xD and for almost all materials, such as conventional steels, stainless steels (e.g. V2A, V4A), titanium, heat-resistant and high-strength steels of up to 1200 N/mm² strength and casting materials. Also suitable for non-ferrous metals, such as aluminium, aluminium alloys, bronze and plastics.

3 in 1 - Drilling, thread cutting and countersinking/deburring in just one operation

No tool change required, saves time and costs

The first combination screw tap, which is suitable for thicker workpieces in addition to sheet metal machining

Enables double-depth drilling, thread cutting and countersinking/deburring compared to conventional combination screw taps (2xD instead of 1xD)

The first combination screw tap that is not limited to use in materials up to 600 N/mm² strength, but suitable for almost all materials

Newly developed tool geometry and HSCo cutting material

Significantly longer service life compared to conventional combination screw taps

Newly developed tool geometry and HSCo cutting material

Very fast, precise work

Twist drill with speed geometry

Optimal centring when working on curved surfaces

Twist drill with 135° tip angle and optimised cross thinning

Newly developed shaft generation with a combination of polygon and straight shank with square drive

The polygon shaft prevents turning in the drill chuck, ensures optimal power transmission and protects the drill chuck from damage

Available exclusively from Würth

Notice

Countersinks according to DIN74-1 for countersunk head screws (according to DIN 7991) are not possible.

For use in cordless drill drivers as well as on hand-held, pillar and upright drills.

Sufficient coolant and lubricant must be added.

For tool/material assignments, see the overview tables.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Instructions

After the drilling process, it is essential to drastically reduce the rotation speed for thread cutting and countersinking/deburring. The recommended cutting values, depending on the material and tool diameter, can be found in the cutting values overview included in the online shop.

Thread type x nominal diameter	M3
Thread type	Metric thread
Material to be processed	Steel Cast metal Stainless steel Titanium Non-ferrous metal
Hole type	Clearance hole ≤ 2xD
Quality	ZEBRA-Premium
Suitable for machine type	Cordless screwdrivers Drill Pedestal drilling machine
Pitch	0.5 mm
Length	62 mm
Shank diameter	4.5 mm
Angle of the tip	135 Degree
Size of square	3.4 mm
Cutting material	HSCo
Surface	Vaporised
Shank style	Combination of polygonal and cylinder shank with square drive
Tolerance of screw taps	ISO 2 (6H)
Service life (points system)	4 of 4 points
Trueness to gauge (points system)	4 of 4 points
Versatility (points system)	4 of 4 points
Cutting behaviour (points system)	4 of 4 points
Chip formation (points system)	4 of 4 points
Suitable for tensile strength up to	1200 N/mm²
Material of sub-group	General structural steels Non-alloyed tempering steels Alloyed tempering steels Nitriding steels Tool steels High-speed steels Cast iron Ductile iron Malleable cast iron White cast iron Stainless steels, sulphurated Stainless steels, austenitic Stainless steels, martensitic Titanium Titanium alloys Special alloys Hardox Spring steels Aluminium Aluminium alloys Aluminium wrought alloys Aluminium casting alloys (<10% silicon) Copper, low-alloyed Brass, long-chipping Bronze, long-chipping Plastics, thermoset Plastics, thermoplastic

Additional accessory:

Product

Description

Quantity

Price
/PU

CUT+COOL Perfect drilling and cutting oil

CUTOIL-PERFECT-(CUT-COOL)-400ML

Art.-no. 0893050008

High-performance cutting oil for the heaviest machining work and higher cutting speeds

Drilling and cutting foam CUT+COOL

CUTFM-DRL-(CUT-COOL)-400ML

Art.-no. 0893050007

Highly active, high-performance cutting foam for all machining work.

Cut and Cool Perfect drilling/cutting paste

CUTPAST-DRILL-(CUT-COOL-PERFECT)-500ML

Art.-no. 0893050010

Optimum results and safety for all materials and applications

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).