HSCo Multi Special machine tap for blind holes DIN 376 - MATAP-BLIHO-HSCO-DIN376-MULTI-M5

HSCo Multi Special machine tap for blind holes DIN 376 - MATAP-BLIHO-HSCO-DIN376-MULTI-M5 - 1

HSCo Multi Special machine tap for blind holes DIN 376

Name: HSCo Multi Special machine tap for blind holes DIN 376
Brand: Würth
SKU: 0659860500

Machine tap, HSCo, multi DIN 376, form C
MATAP-BLIHO-HSCO-DIN376-MULTI-M5
ZEBRA

Art.-no. 0659860500

EAN 4056807633114

All versions

Specification

The versatile screw tap with overrun shaft for universal use in steels up to a strength of 1,000 N/mm², stainless steels and non-ferrous metals, such as aluminium, aluminium alloys, bronze and plastics.

Enables use with deep threads or interference contours

The tapered tool shank is always smaller than the core diameter.

For work in an extensive range of materials

The universal geometry allows processing of many different materials.

Long service life and good process reliability

The X allowance ensures an increased service life and process reliability.

Very good adhesion of coolants and lubricants as well as reduced tendency for build-up of materials

The vaporised surface enables coolants and lubricants to stick well and reduces the tendency for deposits to build up.

Notice

Sufficient coolant and lubricant must be added when cutting threads.

For the machine tap/material assignments, see the overview tables

Technical information

Thread type	Metric thread
Material to be processed	Steel, Cast metal, Stainless steel, Non-ferrous metal
Hole type	Blind hole ≤ 2.5xD
Suitable for machine type	Milling/drill center, Pedestal drilling machine
Quality	ZEBRA-Premium
Thread type x nominal diameter	M5
Pitch	0.8 mm
Length	70 mm
Shank diameter	3.5 mm
Size of square	2.7 mm
DIN	376
Cutting material	HSCo
Surface	Vaporised
Form	C
Core hole diameter	4.2 mm
Twist angle	40° (right)
Shank style	Cylindrical with square drive
Tolerance of screw taps	ISO 2X (6HX)
Suitable for tensile strength up to	1000 N/mm²
Service life (points system)	2 of 4 points
Trueness to gauge (points system)	4 of 4 points
Versatility (points system)	3 of 4 points
Cutting behaviour (points system)	3 of 4 points
Chip formation (points system)	2 of 4 points
Material of sub-group	General structural steels, Non-alloyed tempering steels, Nitriding steels, Tool steels, High-speed steels, Stainless steels, sulphurated, Stainless steels, austenitic, Stainless steels, martensitic, Bronze, long-chipping, Brass, long-chipping, Plastics, thermoset, Plastics, thermoplastic, Aluminium alloys, Aluminium, Aluminium casting alloys (<10% silicon), Aluminium wrought alloys

Cutting values
For M3-M5
Material designation	Tensile strength			M3			M4			M5
		v_c		n		f	n		f	n		f
		from	to	from	to		from	to		from	to
Steels
General structural steels	< 850 N/mm²	20	50	2122	5305	0,50	1592	3979	0,70	1273	3183	0,80
Unalloyed quenched and tempered steels	< 850 N/mm²	20	50	2122	5305	0,50	1592	3979	0,70	1273	3183	0,80
Low-alloy quenched and tempered steels	< 850 N/mm²	20	50	2122	5305	0,50	1592	3979	0,70	1273	3183	0,80
Unalloyed quenched and tempered steels	< 1,000 N/mm²	20	50	2122	5305	0,50	1592	3979	0,70	1273	3183	0,80
Low-alloy quenched and tempered steels	< 1,000 N/mm²	20	50	2122	5305	0,50	1592	3979	0,70	1273	3183	0,80
Alloyed quenched and tempered steels	< 1,200 N/mm²	5	20	531	2122	0,50	398	1592	0,70	318	1273	0,80
Nitriding steels	< 1,200 N/mm²	5	20	531	2122	0,50	398	1592	0,70	318	1273	0,80
Tool steels	< 1,200 N/mm²	5	20	531	2122	0,50	398	1592	0,70	318	1273	0,80
High-speed steels	< 1,200 N/mm²	5	20	531	2122	0,50	398	1592	0,70	318	1273	0,80
High-grade steels
Stainless steels	< 850 N/mm²	6	10	637	1061	0,50	477	796	0,70	382	637	0,80
Titanium	< 850 N/mm²	4	6	424	637	0,50	318	477	0,70	255	382	0,80
Special alloys	< 1,200 N/mm²	3	10	318	1061	0,50	239	796	0,70	191	637	0,80
Cast metals
Cast iron	< 350 HB	20	50	2122	5305	0,50	1592	3979	0,70	1273	3183	0,80
Spheroidal graphite and malleable iron	< 350 HB	20	50	2122	5305	0,50	1592	3979	0,70	1273	3183	0,80
Non-ferrous metals
Aluminium	< 450 N/mm²	20	40	2122	4244	0,50	1592	3183	0,70	1273	2546	0,80
Aluminium alloys	< 450 N/mm²	10	30	1061	3183	0,50	796	2387	0,70	637	1910	0,80
Aluminium wrought alloys	< 400 N/mm²	20	30	2122	3183	0,50	1592	2387	0,70	1273	1910	0,80
Aluminium cast alloys <= 10 % Si	< 600 N/mm²	20	30	2122	3183	0,50	1592	2387	0,70	1273	1910	0,80
Low-alloy copper	< 400 N/mm²	10	30	1061	3183	0,50	796	2387	0,70	637	1910	0,80
Long-chipping brass	< 600 N/mm²	20	50	2122	5305	0,50	1592	3979	0,70	1273	3183	0,80
Long-chipping bronze	< 1,000 N/mm²	10	30	1061	3183	0,50	796	2387	0,70	637	1910	0,80
Plastics
Thermosetting plastics		10	15	1061	1592	0,50	796	1194	0,70	637	955	0,80
Thermoplastic plastics		20	30	2122	3183	0,50	1592	2387	0,70	1273	1910	0,80

Key
v_c = cutting speed [m/min]
f = feed [mm/r]
n = rotation speed [rpm]
The suggested cutting values are reference values and must be adapted to the respective conditions.

For M6-M10
Material designation	Tensile strength			M6			M8			M10
		v_c		n		f	n		f	n		f
		from	to	from	to		from	to		from	to
Steels
General structural steels	< 850 N/mm²	20	50	1061	2653	1,00	796	1989	1,25	637	1592	1,50
Unalloyed quenched and tempered steels	< 850 N/mm²	20	50	1061	2653	1,00	796	1989	1,25	637	1592	1,50
Low-alloy quenched and tempered steels	< 850 N/mm²	20	50	1061	2653	1,00	796	1989	1,25	637	1592	1,50
Unalloyed quenched and tempered steels	< 1,000 N/mm²	20	50	1061	2653	1,00	796	1989	1,25	637	1592	1,50
Low-alloy quenched and tempered steels	< 1,000 N/mm²	20	50	1061	2653	1,00	796	1989	1,25	637	1592	1,50
Alloyed quenched and tempered steels	< 1,200 N/mm²	5	20	265	1061	1,00	199	796	1,25	159	637	1,50
Nitriding steels	< 1,200 N/mm²	5	20	265	1061	1,00	199	796	1,25	159	637	1,50
Tool steels	< 1,200 N/mm²	5	20	265	1061	1,00	199	796	1,25	159	637	1,50
High-speed steels	< 1,200 N/mm²	5	20	265	1061	1,00	199	796	1,25	159	637	1,50
High-grade steels
Stainless steels	< 850 N/mm²	6	10	318	531	1,00	239	398	1,25	191	318	1,50
Titanium	< 850 N/mm²	4	6	212	318	1,00	159	239	1,25	127	191	1,50
Special alloys	< 1,200 N/mm²	3	10	159	531	1,00	119	398	1,25	95	318	1,50
Cast metals
Cast iron	< 350 HB	20	50	1061	2653	1,00	796	1989	1,25	637	1592	1,50
Spheroidal graphite and malleable iron	< 350 HB	20	50	1061	2653	1,00	796	1989	1,25	637	1592	1,50
Non-ferrous metals
Aluminium	< 450 N/mm²	20	40	1061	2122	1,00	796	1592	1,25	637	1273	1,50
Aluminium alloys	< 450 N/mm²	10	30	531	1592	1,00	398	1194	1,25	318	955	1,50
Aluminium wrought alloys	< 400 N/mm²	20	30	1061	1592	1,00	796	1194	1,25	637	955	1,50
Aluminium cast alloys <= 10 % Si	< 600 N/mm²	20	30	1061	1592	1,00	796	1194	1,25	637	955	1,50
Low-alloy copper	< 400 N/mm²	10	30	531	1592	1,00	398	1194	1,25	318	955	1,50
Long-chipping brass	< 600 N/mm²	20	50	1061	2653	1,00	796	1989	1,25	637	1592	1,50
Long-chipping bronze	< 1,000 N/mm²	10	30	531	1592	1,00	398	1194	1,25	318	955	1,50
Plastics
Thermosetting plastics		10	15	531	796	1,00	398	597	1,25	318	477	1,50
Thermoplastic plastics		20	30	1061	1592	1,00	796	1194	1,25	637	955	1,50

Documents

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Accessory

Additional accessory:

Product

Description

Quantity

Price
/PU

CUT+COOL drilling and cutting oil

CUTOIL-DRILL-(CUT-COOL)-400ML

Art.-no. 0893050004

Multi cutting oil for light to medium machining work

Drilling and cutting foam CUT+COOL

CUTFM-DRL-(CUT-COOL)-400ML

Art.-no. 0893050007

Highly active, high-performance cutting foam for all machining work.

CUT+COOL Perfect drilling and cutting oil

CUTOIL-PERFECT-(CUT-COOL)-400ML

Art.-no. 0893050008

High-performance cutting oil for the heaviest machining work and higher cutting speeds

Cut and Cool Perfect drilling/cutting paste

CUTPAST-DRILL-(CUT-COOL-PERFECT)-500ML

Art.-no. 0893050010

Optimum results and safety for all materials and applications

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).