Welcome to Würth Aerospace Solutions For trade customers only
HSCo Multi Special machine tap for through holes DIN 376 - MATAP-THRGHO-HSCO-DIN376-MULTI-M10 HSCo Multi Special machine tap for through holes DIN 376 - MATAP-THRGHO-HSCO-DIN376-MULTI-M10 HSCo Multi Special machine tap for through holes DIN 376 - MATAP-THRGHO-HSCO-DIN376-MULTI-M10
HSCo Multi Special machine tap for through holes DIN 376 - MATAP-THRGHO-HSCO-DIN376-MULTI-M10 - 1
HSCo Multi Special machine tap for through holes DIN 376 - MATAP-THRGHO-HSCO-DIN376-MULTI-M10 - 2
HSCo Multi Special machine tap for through holes DIN 376 - MATAP-THRGHO-HSCO-DIN376-MULTI-M10 - 3

HSCo Multi Special machine tap for through holes DIN 376

Machine tap, HSCo, multi DIN 376, form B
MATAP-THRGHO-HSCO-DIN376-MULTI-M10
ZEBRA

Art.-no. 0659761000
EAN 4056807633527
All versions

Prices for customers after login
HSCo Multi Special machine tap for through holes DIN 376

Art.-no. 0659761000

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

The versatile screw tap with overrun shaft for universal use in steels up to a strength of 1,000 N/mm², stainless steels and non-ferrous metals, such as aluminium, aluminium alloys, bronze and plastics.

Enables use with deep threads or interference contours


The tapered tool shank is always smaller than the core diameter.



For work in an extensive range of materials


The universal geometry allows processing of many different materials.



Long service life and good process reliability


The X allowance ensures an increased service life and process reliability.



Very good adhesion of coolants and lubricants as well as reduced tendency for build-up of materials


The vaporised surface enables coolants and lubricants to stick well and reduces the tendency for deposits to build up.

Notice
  • Sufficient coolant and lubricant must be added when cutting threads.

  • For the machine tap/material assignments, see the overview tables
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Instructions

Before reversing the screw tap, the entire spiral point of the tool must be removed from the drill hole. Failure to do so may cause cutting edges to chip or the tool to break.

Thread type

Metric thread

Material to be processed

Steel
Cast metal
Stainless steel
Non-ferrous metal

Hole type

Clearance hole ≤ 3xD

Suitable for machine type

Milling/drill center
Pedestal drilling machine

Quality

ZEBRA-Premium

Thread type x nominal diameter

M10

Pitch

1.5 mm

Length

100 mm

Shank diameter

7 mm

Size of square

5.5 mm

DIN

376

Cutting material

HSCo

Surface

Vaporised

Form

B

Core hole diameter

8.5 mm

Shank style

Cylindrical with square drive

Tolerance of screw taps

ISO 2X (6HX)

Suitable for tensile strength up to

1000 N/mm²

Service life (points system)

2 of 4 points

Trueness to gauge (points system)

4 of 4 points

Versatility (points system)

3 of 4 points

Cutting behaviour (points system)

3 of 4 points

Chip formation (points system)

2 of 4 points

Material of sub-group

General structural steels
Non-alloyed tempering steels
Nitriding steels
Tool steels
High-speed steels
Stainless steels, sulphurated
Stainless steels, austenitic
Stainless steels, martensitic
Bronze, long-chipping
Brass, long-chipping
Plastics, thermoset
Plastics, thermoplastic
Aluminium alloys
Aluminium
Aluminium casting alloys (<10% silicon)
Aluminium wrought alloys

Cutting values
For M3-M5
Material designationTensile strength M3M4M5
vcnfnfnf
fromtofromto fromto fromto
Steels
General structural steels< 850 N/mm²2050212253050,50159239790,70127331830,80
Unalloyed quenched and tempered steels< 850 N/mm²2050212253050,50159239790,70127331830,80
Low-alloy quenched and tempered steels< 850 N/mm²2050212253050,50159239790,70127331830,80
Unalloyed quenched and tempered steels< 1,000 N/mm²2050212253050,50159239790,70127331830,80
Low-alloy quenched and tempered steels< 1,000 N/mm²2050212253050,50159239790,70127331830,80
Alloyed quenched and tempered steels< 1,200 N/mm²52053121220,5039815920,7031812730,80
Nitriding steels< 1,200 N/mm²52053121220,5039815920,7031812730,80
Tool steels< 1,200 N/mm²52053121220,5039815920,7031812730,80
High-speed steels< 1,200 N/mm²52053121220,5039815920,7031812730,80
High-grade steels
Stainless steels< 850 N/mm²61063710610,504777960,703826370,80
Titanium< 850 N/mm²464246370,503184770,702553820,80
Special alloys< 1,200 N/mm²31031810610,502397960,701916370,80
Cast metals
Cast iron< 350 HB2050212253050,50159239790,70127331830,80
Spheroidal graphite and malleable iron< 350 HB2050212253050,50159239790,70127331830,80
Non-ferrous metals
Aluminium< 450 N/mm²2040212242440,50159231830,70127325460,80
Aluminium alloys< 450 N/mm²1030106131830,5079623870,7063719100,80
Aluminium wrought alloys< 400 N/mm²2030212231830,50159223870,70127319100,80
Aluminium cast alloys <= 10 % Si< 600 N/mm²2030212231830,50159223870,70127319100,80
Low-alloy copper< 400 N/mm²1030106131830,5079623870,7063719100,80
Long-chipping brass< 600 N/mm²2050212253050,50159239790,70127331830,80
Long-chipping bronze< 1,000 N/mm²1030106131830,5079623870,7063719100,80
Plastics
Thermosetting plastics 1015106115920,5079611940,706379550,80
Thermoplastic plastics 2030212231830,50159223870,70127319100,80
For M6-M10
Material designationTensile strength M6M8M10
vcnfnfnf
fromtofromto fromto fromto
Steels
General structural steels< 850 N/mm²2050106126531,0079619891,2563715921,50
Unalloyed quenched and tempered steels< 850 N/mm²2050106126531,0079619891,2563715921,50
Low-alloy quenched and tempered steels< 850 N/mm²2050106126531,0079619891,2563715921,50
Unalloyed quenched and tempered steels< 1,000 N/mm²2050106126531,0079619891,2563715921,50
Low-alloy quenched and tempered steels< 1,000 N/mm²2050106126531,0079619891,2563715921,50
Alloyed quenched and tempered steels< 1,200 N/mm²52026510611,001997961,251596371,50
Nitriding steels< 1,200 N/mm²52026510611,001997961,251596371,50
Tool steels< 1,200 N/mm²52026510611,001997961,251596371,50
High-speed steels< 1,200 N/mm²52026510611,001997961,251596371,50
High-grade steels
Stainless steels< 850 N/mm²6103185311,002393981,251913181,50
Titanium< 850 N/mm²462123181,001592391,251271911,50
Special alloys< 1,200 N/mm²3101595311,001193981,25953181,50
Cast metals
Cast iron< 350 HB2050106126531,0079619891,2563715921,50
Spheroidal graphite and malleable iron< 350 HB2050106126531,0079619891,2563715921,50
Non-ferrous metals
Aluminium< 450 N/mm²2040106121221,0079615921,2563712731,50
Aluminium alloys< 450 N/mm²103053115921,0039811941,253189551,50
Aluminium wrought alloys< 400 N/mm²2030106115921,0079611941,256379551,50
Aluminium cast alloys <= 10 % Si< 600 N/mm²2030106115921,0079611941,256379551,50
Low-alloy copper< 400 N/mm²103053115921,0039811941,253189551,50
Long-chipping brass< 600 N/mm²2050106126531,0079619891,2563715921,50
Long-chipping bronze< 1,000 N/mm²103053115921,0039811941,253189551,50
Plastics
Thermosetting plastics 10155317961,003985971,253184771,50
Thermoplastic plastics 2030106115921,0079611941,256379551,50
Key
vc = cutting speed [m/min]
f = feed [mm/r]
n = rotation speed [rpm]
The suggested cutting values are reference values and must be adapted to the respective conditions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details