HSCo TiCN spot weld cutter for Vario Drill
HSCo TiCN spot weld cutter for Vario Drill
CTR-SPTWELD-TICN-(VARIO-DRILL)-8MM
Register now and access more than 125,000 products
TICN coating
Approx. 30% harder than TiN coating, extends the life of the cutting edges by two to three times compared to TiN-coated drills.
Maximum speed
at Ø 8 up to 950 rpm
Special drill for removing spot welds
Excellent centring of the drill on the welding point
Wide yet stable tip geometry
Can be used in all common drilling machines
Datasheets(X)
Number of teeth | 2 PCS |
Diameter | 8 mm |
Length | 44 mm |
Shank diameter | 8 mm |
Last viewed
Safety boots, S3
Hexagonal bolt with shank DIN 931, steel 10.9, zinc-plated, blue passivated (A2K)
Low-cut safety shoe S3
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, plain
Electrician's chisel
Cemented carbide hole saw for universal use
Hexagon head serrated screw with flange W-0274, steel 8.8, zinc-plated, blue passivated (A2K)
Combination joist hanger 1.5 mm One piece
Low-cut safety shoes, S1
2C HS clear lacquer VOC