Welcome to Würth Aerospace Solutions For trade customers only

HSS SMART STEP sheet metal conical drill bit

Sheet metal conical drill bit HSS SMART STEP
SHTMETCONIDRL-SMARTSTEP-SZ1-(D3-14MM)
ZEBRA SMART STEP

Art.-no. 0694456014
EAN 4065746557603

Prices for customers after login
HSS SMART STEP sheet metal conical drill bit

Art.-no. 0694456014

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

The sheet metal conical drill bit with unique SMART STEP technology and spiral groove for extremely fast, comfortable and precise use in all common materials with a material thickness of up to 4 mm.

SMART STEP technology


  • Up to 3x faster tapping compared to conventional sheet metal conical drill bits

  • Up to 50 % longer service life compared to conventional sheet metal conical drill bits

  • Significantly less effort required when drilling compared to conventional sheet metal conical drill bits

  • Saves pre-drilling, precise tapping without running off centre

  • Comfortable, stepless boring or enlarging of an existing drill hole

  • Burr-free drilling without deformation of the sheet metal

  • Precise, circular drilling


Deep-ground spiral flute


Excellent chip removal



Laser scaling in the flute


Easy reading of the hole diameter during the drilling process



3-flat shank


  • No spinning in the drill chuck: faster, more comfortable working

  • Optimal power transmission

  • Protects the drill chuck from damage

  • Little effort required to loosen and tighten the drill chuck


Product packaging made of 100 % PCR (recycled plastic from household waste), 100 % recyclable and Cradle to Cradle Certified® Bronze



Available exclusively from Würth

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • The universal tool for large, stepless drilling in sheet metal.

  • Centring, spot drilling, boring and deburring of sheet metal, tubes and profiles in one operation, for use on both hand drills and stationary equipment.

  • Ideal for use in the electrical trade, plumbing and heating systems, automotive workshops, mechanical engineering, switch cabinet manufacturing or container and equipment engineering.
Instructions
  • Ensure that there is sufficient coolant/lubricant.

  • Observe the rotation speed table

  • Do not push during boring. The sheet metal conical drill bit automatically retracts into the sheet metal.

Size

1

Min./max. drill diameter

3-14 mm

Length

59 mm

Shank diameter

6 mm

Cutting material

HSS

Shank style

3-face shank

Surface

Uncoated

Cutting values
For dia. 3.0-14.0 and dia. 5.0-20.0
Material designationTensile strengthvcn
Dia. 3.0-14.0
Art.
dia. 5.0-20.0
art. and
Tapping (1st drilling step)toTapping (1st drilling step)to
Steels
General structural steels≤ 700 N/mm²151500350950250
Unalloyed quenched and tempered steels≤ 700 N/mm²151500350950250
≤ 900 N/mm²111100300700180
Low-alloy quenched and tempered steels≤ 700 N/mm²151500350950250
≤ 900 N/mm²111100300700180
Alloyed quenched and tempered steels≤ 1,300 N/mm²9900200550140
Nitriding steels≤ 1,300 N/mm²9900200550140
Tool steels≤ 1,300 N/mm²9900200550140
High-speed steels≤ 1,300 N/mm²9900200550140
Cast metals
Cast iron≤ 350 HB151500350950250
Spheroidal graphite and malleable iron≤ 350 HB121250270750190
Non-ferrous metals
Aluminium≤ 450 N/mm²1818004501100350
Aluminium alloys≤ 450 N/mm²1718004001100350
Low-alloy copper≤ 400 N/mm²1718004001100350
Short-chipping brass≤ 850 N/mm²1818004501100350
Long-chipping brass≤ 850 N/mm²1718004001100350
Plastics
Plastics, thermosetting 2626006001600400
Plastics, thermoplastic 2425005501500400
Cutting values
For dia. 5.0-31.0 and dia. 16.0-30.5
Material designationTensile strengthvcn
Dia. 5.0-31.0
Art.
Dia. 16.0-30.5
Art.
Tapping (1st drilling step)toTapping (1st drilling step)to
Steels
General structural steels≤ 700 N/mm²15950150290150
Unalloyed quenched and tempered steels≤ 700 N/mm²15950150290150
≤ 900 N/mm²11700110200110
Low-alloy quenched and tempered steels≤ 700 N/mm²15950150290150
≤ 900 N/mm²11700110200110
Alloyed quenched and tempered steels≤ 1,300 N/mm²9550100180100
Nitriding steels≤ 1,300 N/mm²9550100180100
Tool steels≤ 1,300 N/mm²9550100180100
High-speed steels≤ 1,300 N/mm²9550100180100
Cast metals
Cast iron≤ 350 HB15950150290150
Spheroidal graphite and malleable iron≤ 350 HB12750120240125
Non-ferrous metals
Aluminium≤ 450 N/mm²181100200360200
Aluminium alloys≤ 450 N/mm²171100200360200
Low-alloy copper≤ 400 N/mm²171100200360200
Short-chipping brass≤ 850 N/mm²181100200360200
Long-chipping brass≤ 850 N/mm²171100200360200
Plastics
Plastics, thermosetting 261600300550300
Plastics, thermoplastic 241500250500250
Cutting values
For dia. 24.0-40.0 and dia. 36.0-50.0
Material designationTensile strengthvcn
Dia. 24.0-40.0
Art.
Dia. 36.0-50.0
Art.
Tapping (1st drilling step)toTapping (1st drilling step)to
Steels
General structural steels≤ 700 N/mm²15200120130100
Unalloyed quenched and tempered steels≤ 700 N/mm²15200120130100
≤ 900 N/mm²11140859570
Low-alloy quenched and tempered steels≤ 700 N/mm²15200120130100
≤ 900 N/mm²11140859570
Alloyed quenched and tempered steels≤ 1,300 N/mm²9120758060
Nitriding steels≤ 1,300 N/mm²9120758060
Tool steels≤ 1,300 N/mm²9120758060
High-speed steels≤ 1,300 N/mm²9120758060
Cast metals
Cast iron≤ 350 HB15200120130100
Spheroidal graphite and malleable iron≤ 350 HB1216010010575
Non-ferrous metals
Aluminium≤ 450 N/mm²18250150150110
Aluminium alloys≤ 450 N/mm²17250150150110
Low-alloy copper≤ 400 N/mm²17250150150110
Short-chipping brass≤ 850 N/mm²18250150150110
Long-chipping brass≤ 850 N/mm²17250150150110
Plastics
Plastics, thermosetting 26350200230160
Plastics, thermoplastic 24350200220150
Cutting values
For dia. 40.0-61.0
Material designationTensile strengthvcn
Dia. 40.0-61.0
Art.
Tapping (1st drilling step)to
Steels
General structural steels≤ 700 N/mm²1511080
Unalloyed quenched and tempered steels≤ 700 N/mm²1511080
≤ 900 N/mm²118555
Low-alloy quenched and tempered steels≤ 700 N/mm²1511080
≤ 900 N/mm²118555
Alloyed quenched and tempered steels≤ 1,300 N/mm²97045
Nitriding steels≤ 1,300 N/mm²97045
Tool steels≤ 1,300 N/mm²97045
High-speed steels≤ 1,300 N/mm²97045
Cast metals
Cast iron≤ 350 HB1511080
Spheroidal graphite and malleable iron≤ 350 HB129060
Non-ferrous metals
Aluminium≤ 450 N/mm²1814090
Aluminium alloys≤ 450 N/mm²1714090
Low-alloy copper≤ 400 N/mm²1714090
Short-chipping brass≤ 850 N/mm²1814090
Long-chipping brass≤ 850 N/mm²1714090
Plastics
Plastics, thermosetting 26200130
Plastics, thermoplastic 24190125
Key
vc = cutting speed [m/min]
n = rotation speed [rpm]
The suggested cutting values are reference values and must be adapted to the respective conditions.
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
CUT+COOL drilling and cutting oil

CUTOIL-DRILL-(CUT-COOL)-400ML

Multi cutting oil for light to medium machining work
Drilling and cutting foam CUT+COOL

CUTFM-DRL-(CUT-COOL)-400ML

Highly active, high-performance cutting foam for all machining work.
CUT+COOL Perfect drilling and cutting oil

CUTOIL-PERFECT-(CUT-COOL)-400ML

High-performance cutting oil for the heaviest machining work and higher cutting speeds
Cut and Cool Perfect drilling/cutting paste

CUTPAST-DRILL-(CUT-COOL-PERFECT)-500ML

Optimum results and safety for all materials and applications
Cordless drill driver ABS 18 POWER M-CUBE

DRLDRIV-CORDL-(ABS 18 POWER)-2X4AH-8.4.2

MASTER M-CUBE
Very powerful, handy cordless drill driver specially designed for hard use on construction sites with a torque of 140 Nm
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information