HSS SMART STEP sheet metal conical drill bit - SHTMETCONIDRL-SMARTSTEP-SZ3-(D16-30,5MM)

HSS SMART STEP sheet metal conical drill bit - SHTMETCONIDRL-SMARTSTEP-SZ3-(D16-30,5MM) - 1

HSS SMART STEP sheet metal conical drill bit

Name: HSS SMART STEP sheet metal conical drill bit
Brand: Würth
SKU: 0694456030

Sheet metal conical drill bit HSS SMART STEP
SHTMETCONIDRL-SMARTSTEP-SZ3-(D16-30,5MM)
ZEBRA SMART STEP

Art.-no. 0694456030

EAN 4065746557573

All versions

Similar products

Prices for customers after login

HSS SMART STEP sheet metal conical drill bit

Art.-no. 0694456030

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

The sheet metal conical drill bit with unique SMART STEP technology and spiral groove for extremely fast, comfortable and precise use in all common materials with a material thickness of up to 4 mm.

SMART STEP technology

Up to 3x faster spot drilling compared to conventional sheet metal conical drill bits

Up to 50 % longer service life compared to conventional sheet metal conical drill bits

Significantly less effort required when drilling compared to conventional sheet metal conical drill bits

Eliminates pre-drilling, precise spot drilling without running off-centre

Comfortable, stepless boring or enlarging of an existing drill hole

Burr-free drilling without deformation of the sheet metal

Precise, circular holes

Deep-ground spiral flute

Excellent chip removal

Laser scaling in the flute

Easy reading of the hole diameter during the drilling process

3-flat shank

No spinning in the drill chuck: faster, more comfortable working

Optimal power transmission

Protects the drill chuck from damage

Minimal effort required to loosen and tighten the drill chuck

Product packaging made from 100 % PCR (recycled plastic from household waste) and 100 % recyclable

Available exclusively from Würth

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

The universal tool for large, stepless drilling in sheet metal.

Centring, spot drilling, boring and deburring of sheet metal, tubes and profiles in one operation, for use on both hand drills and stationary equipment.

Ideal for use in the electrical trade, plumbing and heating systems, automotive workshops, mechanical engineering, switch cabinet manufacturing or container and equipment engineering.

Instructions

Ensure that there is sufficient coolant/lubricant.

Observe the rotation speed table

Do not push during boring. The sheet metal conical drill bit automatically retracts into the sheet metal.

Size	3
Min./max. drill diameter	16-30.5 mm
Length	81 mm
Shank diameter	9 mm
Cutting material	HSS
Shank style	3-face shank
Surface	Uncoated

For dia. 40.0-61.0
Material designation	Tensile strength	v_c	n
			Dia. 40.0-61.0 Art.
			Tapping (1st drilling step)	to
Steels
General structural steels	≤ 700 N/mm²	15	110	80
Unalloyed quenched and tempered steels	≤ 700 N/mm²	15	110	80
Unalloyed quenched and tempered steels	≤ 900 N/mm²	11	85	55
Low-alloy quenched and tempered steels	≤ 700 N/mm²	15	110	80
Low-alloy quenched and tempered steels	≤ 900 N/mm²	11	85	55
Alloyed quenched and tempered steels	≤ 1,300 N/mm²	9	70	45
Nitriding steels	≤ 1,300 N/mm²	9	70	45
Tool steels	≤ 1,300 N/mm²	9	70	45
High-speed steels	≤ 1,300 N/mm²	9	70	45
Cast metals
Cast iron	≤ 350 HB	15	110	80
Spheroidal graphite and malleable iron	≤ 350 HB	12	90	60
Non-ferrous metals
Aluminium	≤ 450 N/mm²	18	140	90
Aluminium alloys	≤ 450 N/mm²	17	140	90
Low-alloy copper	≤ 400 N/mm²	17	140	90
Short-chipping brass	≤ 850 N/mm²	18	140	90
Long-chipping brass	≤ 850 N/mm²	17	140	90
Plastics
Plastics, thermosetting		26	200	130
Plastics, thermoplastic		24	190	125

For dia. 24.0-40.0 and dia. 36.0-50.0
Material designation	Tensile strength	v_c	n
			Dia. 24.0-40.0 Art.		Dia. 36.0-50.0 Art.
			Tapping (1st drilling step)	to	Tapping (1st drilling step)	to
Steels
General structural steels	≤ 700 N/mm²	15	200	120	130	100
Unalloyed quenched and tempered steels	≤ 700 N/mm²	15	200	120	130	100
Unalloyed quenched and tempered steels	≤ 900 N/mm²	11	140	85	95	70
Low-alloy quenched and tempered steels	≤ 700 N/mm²	15	200	120	130	100
Low-alloy quenched and tempered steels	≤ 900 N/mm²	11	140	85	95	70
Alloyed quenched and tempered steels	≤ 1,300 N/mm²	9	120	75	80	60
Nitriding steels	≤ 1,300 N/mm²	9	120	75	80	60
Tool steels	≤ 1,300 N/mm²	9	120	75	80	60
High-speed steels	≤ 1,300 N/mm²	9	120	75	80	60
Cast metals
Cast iron	≤ 350 HB	15	200	120	130	100
Spheroidal graphite and malleable iron	≤ 350 HB	12	160	100	105	75
Non-ferrous metals
Aluminium	≤ 450 N/mm²	18	250	150	150	110
Aluminium alloys	≤ 450 N/mm²	17	250	150	150	110
Low-alloy copper	≤ 400 N/mm²	17	250	150	150	110
Short-chipping brass	≤ 850 N/mm²	18	250	150	150	110
Long-chipping brass	≤ 850 N/mm²	17	250	150	150	110
Plastics
Plastics, thermosetting		26	350	200	230	160
Plastics, thermoplastic		24	350	200	220	150

Key
v_c = cutting speed [m/min]
n = rotation speed [rpm]
The suggested cutting values are reference values and must be adapted to the respective conditions.

For dia. 5.0-31.0 and dia. 16.0-30.5
Material designation	Tensile strength	v_c	n
			Dia. 5.0-31.0 Art.		Dia. 16.0-30.5 Art.
			Tapping (1st drilling step)	to	Tapping (1st drilling step)	to
Steels
General structural steels	≤ 700 N/mm²	15	950	150	290	150
Unalloyed quenched and tempered steels	≤ 700 N/mm²	15	950	150	290	150
Unalloyed quenched and tempered steels	≤ 900 N/mm²	11	700	110	200	110
Low-alloy quenched and tempered steels	≤ 700 N/mm²	15	950	150	290	150
Low-alloy quenched and tempered steels	≤ 900 N/mm²	11	700	110	200	110
Alloyed quenched and tempered steels	≤ 1,300 N/mm²	9	550	100	180	100
Nitriding steels	≤ 1,300 N/mm²	9	550	100	180	100
Tool steels	≤ 1,300 N/mm²	9	550	100	180	100
High-speed steels	≤ 1,300 N/mm²	9	550	100	180	100
Cast metals
Cast iron	≤ 350 HB	15	950	150	290	150
Spheroidal graphite and malleable iron	≤ 350 HB	12	750	120	240	125
Non-ferrous metals
Aluminium	≤ 450 N/mm²	18	1100	200	360	200
Aluminium alloys	≤ 450 N/mm²	17	1100	200	360	200
Low-alloy copper	≤ 400 N/mm²	17	1100	200	360	200
Short-chipping brass	≤ 850 N/mm²	18	1100	200	360	200
Long-chipping brass	≤ 850 N/mm²	17	1100	200	360	200
Plastics
Plastics, thermosetting		26	1600	300	550	300
Plastics, thermoplastic		24	1500	250	500	250

For dia. 3.0-14.0 and dia. 5.0-20.0
Material designation	Tensile strength	v_c	n
			Dia. 3.0-14.0 Art.		dia. 5.0-20.0 art. and
			Tapping (1st drilling step)	to	Tapping (1st drilling step)	to
Steels
General structural steels	≤ 700 N/mm²	15	1500	350	950	250
Unalloyed quenched and tempered steels	≤ 700 N/mm²	15	1500	350	950	250
Unalloyed quenched and tempered steels	≤ 900 N/mm²	11	1100	300	700	180
Low-alloy quenched and tempered steels	≤ 700 N/mm²	15	1500	350	950	250
Low-alloy quenched and tempered steels	≤ 900 N/mm²	11	1100	300	700	180
Alloyed quenched and tempered steels	≤ 1,300 N/mm²	9	900	200	550	140
Nitriding steels	≤ 1,300 N/mm²	9	900	200	550	140
Tool steels	≤ 1,300 N/mm²	9	900	200	550	140
High-speed steels	≤ 1,300 N/mm²	9	900	200	550	140
Cast metals
Cast iron	≤ 350 HB	15	1500	350	950	250
Spheroidal graphite and malleable iron	≤ 350 HB	12	1250	270	750	190
Non-ferrous metals
Aluminium	≤ 450 N/mm²	18	1800	450	1100	350
Aluminium alloys	≤ 450 N/mm²	17	1800	400	1100	350
Low-alloy copper	≤ 400 N/mm²	17	1800	400	1100	350
Short-chipping brass	≤ 850 N/mm²	18	1800	450	1100	350
Long-chipping brass	≤ 850 N/mm²	17	1800	400	1100	350
Plastics
Plastics, thermosetting		26	2600	600	1600	400
Plastics, thermoplastic		24	2500	550	1500	400

Additional accessory:

Product

Description

Quantity

Price
/PU

Drilling and cutting foam CUT+COOL

CUTFM-DRL-(CUT-COOL)-400ML

Art.-no. 0893050007

Highly active, high-performance cutting foam for all machining work.

CUT+COOL Perfect drilling and cutting oil

CUTOIL-PERFECT-(CUT-COOL)-400ML

Art.-no. 0893050008

High-performance cutting oil for the heaviest machining work and higher cutting speeds

Cut and Cool Perfect drilling/cutting paste

CUTPAST-DRILL-(CUT-COOL-PERFECT)-500ML

Art.-no. 0893050010

Optimum results and safety for all materials and applications

Cordless drill driver ABS 18 POWER M-CUBE

DRLDRIV-CORDL-(ABS 18 POWER)-2X4AH-8.4.2

MASTER M-CUBE

Art.-no. 5701404004

Very powerful, handy cordless drill driver specially designed for hard use on construction sites with a torque of 140 Nm

x 1 pcs

CUT+COOL drilling and cutting oil

CUTOIL-DRILL-(CUT-COOL)-400ML

Art.-no. 0893050004

Multi cutting oil for light to medium machining work

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).