HSS SMART STEP stepped twist drill bit - DRL-STEP-SPRL-SMARTSTEP-(D6-39MM)

HSS SMART STEP stepped twist drill bit - DRL-STEP-SPRL-SMARTSTEP-(D6-39MM) - 1

HSS SMART STEP stepped twist drill bit

Name: HSS SMART STEP stepped twist drill bit
Brand: Würth
SKU: 0694450639

Stepped twist drill bit HSS SMART STEP
DRL-STEP-SPRL-SMARTSTEP-(D6-39MM)
ZEBRA SMART STEP

Art.-no. 0694450639

EAN 4065746562225

All versions

Similar products

Prices for customers after login

HSS SMART STEP stepped twist drill bit

Art.-no. 0694450639

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Stepped drill bit with unique SMART STEP technology and dynamically curved rake between the individual step transitions for extremely fast and comfortable use in all common materials with a material thickness of up to 3.5 mm.

Dynamically curved rake between each step transition

Significantly longer service life compared to conventional stepped drill bits

Significantly faster drilling compared to conventional stepped drill bits

Little effort required

Smooth, perfectly controlled drilling process

Greatly reduced formation of burrs

SMART STEP technology

Up to 3x faster tapping compared to conventional stepped drill bits

Precision tapping without centring or centre-punching

No warping of sheet metal

Simple boring or enlarging of an existing drill hole

No rattling or catching in the material

Precise, circular drilling without tearing or splintering

Deep-ground spiral flute

Excellent chip removal

3-flat shank

No spinning in the drill chuck: faster, more comfortable working

Optimal power transmission

Protects the drill chuck from damage

Little effort required to loosen and tighten the drill chuck

Product packaging made of 100 % PCR (recycled plastic from household waste), 100 % recyclable and Cradle to Cradle Certified^® Bronze

Available exclusively from Würth

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

The ideal tool for machining sheet metal.

Centring, spot drilling, boring and deburring of sheet metal, tubes and profiles in one operation, for use on both hand drills and stationary equipment.

Ideal for use in electrical trade, plumbing and heating systems, automotive workshops, mechanical engineering, switch cabinet manufacturing or container and equipment engineering.

Instructions

Ensure that there is sufficient coolant/lubricant

Observe the rotation speed table

Do not push during boring. The stepped drill bit automatically retracts into the sheet metal

Min./max. drill diameter	6-39 mm
Shank diameter	10 mm
Shaft length	24 mm
Length	97 mm
Shank style	3-face shank
Surface	Uncoated
Material to be processed	Steel, Cast metal, Non-ferrous metal, Plastic, Wood

For dia. 6.0-37.0 and dia. 6.0-39.0
Material designation	Tensile strength	v_c	n
			dia. 6.0-37.0 art.		dia. 6.0-39.0 art.
			Tapping (1st drilling step)	to	Tapping (1st drilling step)	to
Steels
General structural steels	≤ 700 N/mm²	23	1200	200	1200	190
Unalloyed hardened steels	≤ 700 N/mm²	23	1200	200	1200	190
Unalloyed hardened steels	≤ 900 N/mm²	19	1000	150	1000	150
Low-alloy hardened steels	≤ 700 N/mm²	23	1200	200	1200	190
Low-alloy hardened steels	≤ 900 N/mm²	19	1000	150	1000	150
Alloyed hardened steels	≤ 1,200 N/mm²	18	950	150	950	140
Nitriding steels	≤ 1,200 N/mm²	18	950	150	950	140
Tool steels	≤ 850 N/mm²	18	950	150	950	140
High-speed steels	≤ 1,200 N/mm²	18	950	150	950	140
Cast metals
Cast iron	≤ 350 HB	15	1000	120	1000	120
Spheroidal graphite and malleable iron	≤ 350 HB	15	1000	120	1000	120
Non-ferrous metals
Aluminium	≤ 450 N/mm²	22	1200	190	1200	180
Aluminium alloys	≤ 450 N/mm²	22	1200	190	1200	180
Low-alloy copper	≤ 400 N/mm²	19	1000	150	1000	150
Short-chipping brass	≤ 850 N/mm²	22	1200	190	1200	180
Long-chipping brass	≤ 850 N/mm²	22	1200	190	1200	180
Plastics
Thermosetting plastics		19	1000	150	1000	150
Thermoplastic plastics		19	1000	150	1000	150

For dia. 5.0-29.0 and dia. 6.0-30.0
Material designation	Tensile strength	v_c	n
			dia. 5.0-29.0 art.		dia. 6.0-30.0 art.
			Drilling (1st drilling step)	to	Drilling (1st drilling step)	to
Steels
General structural steels	≤ 700 N/mm²	23	1500	250	1200	240
Unalloyed quenched and tempered steels	≤ 700 N/mm²	23	1500	250	1200	240
Unalloyed quenched and tempered steels	≤ 900 N/mm²	19	1200	200	1000	200
Low-alloy quenched and tempered steels	≤ 700 N/mm²	23	1500	250	1200	240
Low-alloy quenched and tempered steels	≤ 900 N/mm²	19	1200	200	1000	200
Alloyed quenched and tempered steel	≤ 1,200 N/mm²	18	1100	200	950	190
Nitriding steels	≤ 1,200 N/mm²	18	1100	200	950	190
Tool steels	≤ 850 N/mm²	18	1100	200	950	190
High-speed steels	≤ 1,200 N/mm²	18	1100	200	950	190
Cast metals
Cast iron	≤ 350 HB	15	950	160	1000	150
Spheroidal graphite and malleable iron	≤ 350 HB	15	950	160	1000	150
Non-ferrous metals
Aluminium	≤ 450 N/mm²	22	1400	240	1200	230
Aluminium alloys	≤ 450 N/mm²	22	1400	240	1200	230
Low-alloy copper	≤ 400 N/mm²	19	1200	200	1000	200
Short-chipping brass	≤ 850 N/mm²	22	1400	240	1200	230
Long-chipping brass	≤ 850 N/mm²	22	1400	240	1200	230
Plastics
Thermosetting plastics		19	1200	200	1000	200
Thermoplastic plastics		19	1200	200	1000	200

Key
v_c = cutting speed [m/min]
n = rotation speed [rpm]
The suggested cutting values are reference values and must be adapted to the respective conditions.

dia. 6.0-40.5
Material designation	Tensile strength	v_c	n
			dia. 6.0-40.5 art.
			Tapping (1st drilling step)	to
Steels
General structural steels	≤ 700 N/mm²	23	1200	180
Unalloyed hardened steels	≤ 700 N/mm²	23	1200	180
Unalloyed hardened steels	≤ 900 N/mm²	19	1000	150
Low-alloy hardened steels	≤ 700 N/mm²	23	1200	180
Low-alloy hardened steels	≤ 900 N/mm²	19	1000	150
Alloyed hardened steels	≤ 1,200 N/mm²	18	950	140
Nitriding steels	≤ 1,200 N/mm²	18	950	140
Tool steels	≤ 850 N/mm²	18	950	140
High-speed steels	≤ 1,200 N/mm²	18	950	140
Cast metals
Cast iron	≤ 350 HB	15	1000	120
Spheroidal graphite and malleable iron	≤ 350 HB	15	1000	120
Non-ferrous metals
Aluminium	≤ 450 N/mm²	22	1200	170
Aluminium alloys	≤ 450 N/mm²	22	1200	170
Low-alloy copper	≤ 400 N/mm²	19	1000	150
Short-chipping brass	≤ 850 N/mm²	22	1200	170
Long-chipping brass	≤ 850 N/mm²	22	1200	170
Plastics
Thermosetting plastics		19	1000	150
Thermoplastic plastics		19	1000	150

Art. no.	Number of steps	Diameter of the drilling area [mm]
0694450330	14	3.5/5.5/7.5/9.5/11.5/13.5/15.5/17.5/19.5/21.5/23.5/25.5/27.5/29.5
0694450412	9	4.0/5.0/6.0/7.0/8.0/9.0/10.0/11.0/12.0
0694450420	9	4.0/6.0/8.0/10.0/12.0/14.0/16.0/18.0/20.0
0694450421	9	4.0/6.0/8.0/10.0/12.0/14.0/16.0/18.0/20.0
0694450429	13	4.5/6.5/8.5/10.5/12.5/14.5/16.5/18.5/20.5/22.5/24.5/26.5/28.5
0694450529	13	5.0/7.0/9.0/11.0/13.0/15.0/17.0/19.0/21.0/23.0/25.0/27.0/29.0
0694450630	13	6.0/8.0/10.0/12.0/14.0/16.0/18.0/20.0/22.0/24.0/26.0/28.0/30.0
0694450637	12	6.0/9.0/12.5 (PG7)/15.2 (PG9)/18.6 (PG11)/20.4 (PG13.5)/22.5 (PG16)/26.0/28.3 (PG21)/30.5/34.0/37.0 (PG29)
0694450639	12	6.0/9.0/12.0/15.0/18.0/21.0/24.0/27.0/30.0/33.0/36.0/39.0
0694450640	16	6.5/8.5/10.5/12.5/14.5/16.5/18.5/20.5/23.5/25.5/28.0/30.5/32.5/35.5/38.5/40.5

For dia. 3.5-29.5 and dia. 4.5-28.5
Material designation	Tensile strength	v_c	n
			dia. 3.5-29.5 art.		dia. 4.5-28.5 art.
			Drilling (1st drilling step)	to	Drilling (1st drilling step)	to
Steels
General structural steels	≤ 700 N/mm²	23	2000	250	1600	250
Unalloyed quenched and tempered steels	≤ 700 N/mm²	23	2000	250	1600	250
Unalloyed quenched and tempered steels	≤ 900 N/mm²	19	1700	200	1300	200
Low-alloy quenched and tempered steels	≤ 700 N/mm²	23	2000	250	1600	250
Low-alloy quenched and tempered steels	≤ 900 N/mm²	19	1700	200	1300	200
Alloyed quenched and tempered steel	≤ 1,200 N/mm²	18	1600	160	1250	200
Nitriding steels	≤ 1,200 N/mm²	18	1600	160	1250	200
Tool steels	≤ 850 N/mm²	18	1600	160	1250	200
High-speed steels	≤ 1,200 N/mm²	18	1600	160	1250	200
Cast metals
Cast iron	≤ 350 HB	15	1350	160	1050	160
Spheroidal graphite and malleable iron	≤ 350 HB	15	1350	160	1050	160
Non-ferrous metals
Aluminium	≤ 450 N/mm²	22	2000	240	1500	240
Aluminium alloys	≤ 450 N/mm²	22	2000	240	1500	240
Low-alloy copper	≤ 400 N/mm²	19	1700	200	1300	200
Short-chipping brass	≤ 850 N/mm²	22	2000	240	1500	240
Long-chipping brass	≤ 850 N/mm²	22	2000	240	1500	240
Plastics
Thermosetting plastics		19	1700	200	1300	200
Thermoplastic plastics		19	1700	200	1300	200

For dia. 4.0-12.0 and dia. 4.0-20.0
Material designation	Tensile strength	v_c	n
			dia. 4.0-12.0 art.		dia. 4.0-20.0 art.
			Drilling (1st drilling step)	to	Drilling (1st drilling step)	to
Steels
General structural steels	≤ 700 N/mm²	23	1800	600	1800	360
Unalloyed quenched and tempered steels	≤ 700 N/mm²	23	1800	600	1800	360
Unalloyed quenched and tempered steels	≤ 900 N/mm²	19	1500	500	1500	300
Low-alloy quenched and tempered steels	≤ 700 N/mm²	23	1800	600	1800	360
Low-alloy quenched and tempered steels	≤ 900 N/mm²	19	1500	500	1500	300
Alloyed quenched and tempered steel	≤ 1,200 N/mm²	18	1400	470	1400	280
Nitriding steels	≤ 1,200 N/mm²	18	1400	470	1400	280
Tool steels	≤ 850 N/mm²	18	1400	470	1400	280
High-speed steels	≤ 1,200 N/mm²	18	1400	470	1400	280
Cast metals
Cast iron	≤ 350 HB	15	1200	400	1200	250
Spheroidal graphite and malleable iron	≤ 350 HB	15	1200	400	1200	250
Non-ferrous metals
Aluminium	≤ 450 N/mm²	22	1700	580	1700	350
Aluminium alloys	≤ 450 N/mm²	22	1700	580	1700	350
Low-alloy copper	≤ 400 N/mm²	19	1500	500	1500	300
Short-chipping brass	≤ 850 N/mm²	22	1700	580	1700	350
Long-chipping brass	≤ 850 N/mm²	22	1700	580	1700	350
Plastics
Thermosetting plastics		19	1500	500	1500	300
Thermoplastic plastics		19	1500	500	1500	300

Additional accessory:

Product

Description

Quantity

Price
/PU

Drilling and cutting foam CUT+COOL

CUTFM-DRL-(CUT-COOL)-400ML

Art.-no. 0893050007

Highly active, high-performance cutting foam for all machining work.

CUT+COOL Perfect drilling and cutting oil

CUTOIL-PERFECT-(CUT-COOL)-400ML

Art.-no. 0893050008

High-performance cutting oil for the heaviest machining work and higher cutting speeds

Cut and Cool Perfect drilling/cutting paste

CUTPAST-DRILL-(CUT-COOL-PERFECT)-500ML

Art.-no. 0893050010

Optimum results and safety for all materials and applications

Cordless drill driver ABS 18 POWER M-CUBE

DRLDRIV-CORDL-(ABS 18 POWER)-2X4AH-8.4.2

MASTER M-CUBE

Art.-no. 5701404004

Very powerful, handy cordless drill driver specially designed for hard use on construction sites with a torque of 140 Nm

x 1 pcs

Cordless drill driver ABS 18 POWER M-CUBE

DRLDRIV-CORDL-(ABS 18 POWER)-2X5AH-8.4.2

MASTER M-CUBE

Art.-no. 5701404005

Very powerful, handy cordless drill driver specially designed for hard use on construction sites with a torque of 140 Nm

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).