HSS double angle milling cutter DIN 847
Double angle milling cutter HSS DIN 847 Z20-26 45-90°
PRISMMILCTR-DIN847-HSS-D100,0X45DGR
Register now and access more than 125,000 products
 | |
Product code | 3303 |
Material to be processed | Steel, Cast metal, Stainless steel, Titanium, Copper, Brass, Plastic |
Standards | DIN 847 |
Angle (σ) | 45 Degree |
Diameter (d1 (js16)) | 100 mm |
Cutting width (b) | 18 |
Bore diameter (d2 (H7)) | 32 mm |
Number of cutting edges (Z) | 26 PCS |
Cutting material | HSS |
Surface | Plain |
Tolerance of cutting edge diameter | js16 |
Tool holding device | With longitudinal groove DIN 138 |
Material of sub-group | General structural steels, Non-alloyed tempering steels < 1000 N/mm², Alloyed tempering steels < 1000 N/mm², Nitriding steels < 1300 N/mm², Grey cast iron, Malleable cast iron, Stainless steels < 850 N/mm², Stainless steels > 850 N/mm², Titanium, Titanium alloys, Copper, Brass, Plastics |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Type KA staples
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Solid carbide twist drill bit, internal cooling
Hexalobular-type cheese head screw, low head ISO 14580, plain A2-70 stainless steel
Hexagon nut, low profile, left-hand thread ISO 4035, steel 4, zinc-plated, blue passivated (A2K)
Hexagon head sealing plug with collar and permanent magnet, imperial DIN 910, steel, plain
HPC solid carbide drill Speeddrill 4.0-Inox, DIN 6537K, 3xD short, 4 drill heels, with internal cooling
1-component cutter knife including extremely sharp snap-off blades
Hexagon nut with flange and clamping piece (all-metal) according to MBN standard
Comfort S2 FLEXITEC® ESD safety shoes
